Publikationer

Din avgränsning ger 5 träffar.

• 2022:14 Weld residual stress and strain measurements on a mock-up with single layer strip cladding common in reactor pressure vessels

  SSM perspektiv Bakgrund Reaktortryckkärl tillverkas vanligtvis av låglegerade ferritiska stål som på insidan beläggs med ett eller flera lager av rostfritt stål, så kallad plätering eller på engelska cladding. Den rostfria pläteringen påverkar den strukturella integriteten på flera sätt, dels har pläteringen annorlunda materialegenskaper...

  Innehållstyp: Publikationer

• 2022:11 Kingdom of Sweden IRRS ARM Summary Report 2022

  The IAEA Integrated Regulatory Review Service Mission to Sweden in November 2022...

  Innehållstyp: Publikationer

• 2022:09 Assessment of modelling approaches for axial gas flow inside LWR fuel rods

  SSM perspective Background The fuel rod analysis program SCANAIR has been developed by IRSN (Institut de Radioprotection et de Sûreté Nucléaire) for analysis of reactivity initiated accidents (RIA) in light water reactors. The Swedish Radiation Safety Authority (SSM) has access to SCANAIR in exchange for annual contributions for its further development. The development...

  Innehållstyp: Publikationer

• 2022:04 Warm Pre-Stressing mechanisms

  SSM perspective Background Swedish nuclear power plants (NPP) were originally designed and analyzed with an assumed operating period of approximately 40 years. As Swedish NPPs reach their original technical design life the safety of the additional operating time has to be verified. With increased operating time, the shift in the fracture toughness curve of the reactor pressure vessel (RPV)...

  Innehållstyp: Publikationer

• 2022:03 Effect of Neutron Irradiation on the Oxidation and Corrosion of Austenitic Stainless Steels

  SSM perspective Background Reactor pressure vessel internal components of austenitic stainless steel located close to the core are subject to a high neutron flux. Irradiation by fast neutrons induces changes in the material that affect microstructure, mechanical properties and microchemistry. These changes eventually lead to an increased susceptibility to irradiation assisted stress corrosion...

  Innehållstyp: Publikationer