Publikationer

Din avgränsning ger 175 träffar.

• 2011:06 Reliability Data Handbook for Piping Components in Nordic Nuclear Power Plants – R Book, Phase 2

  The Nordic PSA Group (NPSAG) has undertaken to develop a piping reliability parameter handbook for use in risk-informed applications that involve the consideration of structural integrity of piping systems. The scope of the handbook is to establish high quality reliability parameters that account for the Nordic and worldwide service experience with safety-related and non-safety-related piping...

  Innehållstyp: Publikationer

• 2011:05 Overview and Evaluation of the NESC Projects for Fracture Assessments of Nuclear Components

  The Network for Evaluation of Structural Components (NESC) was started in 1993 and since then six different projects have been carried out. A seventh NESC-project is still in progress. The overall objective of these projects has been to study the reliability of the entire process of structural integrity assessment within an international framework. The network is coordinated by the European...

  Innehållstyp: Publikationer

• 2011:04 Evaluation of the Technical Basis for New Proposals of Fatigue Design of Nuclear Components

  During the recent years fatigue analysis procedures for nuclear components have been investigated. The most common method so far has been the American code ASME III. The basis for the current design procedures in ASME III is quite old and has now been evaluated against modern data leading to the proposal of modified design curves. Also the effect of the environment has been the subject of...

  Innehållstyp: Publikationer

• 2010:47 Utveckling av programpaket för analys av termisk utmattning

  I ett tidigare NESC-projekt (Network for Evaluating Structural Components – Thermal Fatigue) togs fram en Europeisk procedur för hantering av termisk utmattning. Den tidigare myndigheten Statens kärnkraftinspektion (SKI) var en av projektets finansiärer. Proceduren innehåller bl.a. utvärdering av en modell för analys av högcykelutmattning vid turbulent termisk...

  Innehållstyp: Publikationer

• 2010:46 Development of the PRO-LOCA Probabilistic Fracture Mechanics Code, MERIT Final Report

  The MERIT project has been an internationally financed program with the main purpose of developing probabilistic models for piping failure of nuclear components and to include these models in a probabilistic code named PRO-LOCA. The principal objective of the project has been to develop probabilistic models for piping failure of nuclear components and to include these models in a...

  Innehållstyp: Publikationer

• 2010:22 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 16

  This report constitutes Stage 16 of a long-term research and development program concerning the development of diagnostics and monitoring methods for nuclear reactors. Results up to Stage 15 were reported in SKI and SSM reports, as listed below and in the Summary. The results have also been published in international journals and have been included in both licentiate- and doctor’s degrees.

  Innehållstyp: Publikationer

• 2010:45 Evaluation of models for cyclic plastic deformation – A literature study

  Analysis of nuclear components subjected to cyclic plastic deformation is normally based on the American standard ASME III. With the focus to improve the modeling of the stress-strain response under non-monotonic loading, several models for the analysis of cyclic plastic deformation have been developed in recent years. However, experience shows that the analysis and evaluation of plastic...

  Innehållstyp: Publikationer

• 2010:42 Using the EPRI Risk-Informed ISI Methodology on Piping Systems in Forsmark 3

  In the SSM regulation SSMFS 2008:13, it is stated that the selection of locations for inspection of mechanical components shall be based upon the risk for core damage or the risk of release of radioactive substances. Both qualitative and quantitative measures of the relative risk are allowed to be used. So far only the PWRs in Sweden are using a quantitative procedure to evaluate the risk...

  Innehållstyp: Publikationer

• 2010:39 Beskrivning av Eurokoder för betongkonstruktioner

  Eurokoder, som är gemensamma europeiska standarder för utformning och dimensionering av bärande konstruktioner till byggnader och anläggningar, utarbetas av den Europeiska Standardiseringskommittén (CEN) och ges i Sverige ut av det svenska institutet för standarder (SIS). Sverige, liksom de andra CEN-medlemsländerna, är i färd med att ersätta sina...

  Innehållstyp: Publikationer

• 2010:37 Utvärdering av regler och normer för betongkonstruktioner i svenska kärnkraftsanläggningar

  Syftet med projektet var att ta fram rekommendationer för tillämpning av regelverk för betongkonstruktioner i svenska kärnkraftsanläggningar genom att jämföra och utvärdera dels relevanta krav utgivna av europeiska och nordamerikanska myndigheter, och dels relevanta normer och standarder, riktlinjer eller liknande för betongkonstruktioner. Baserat på...

  Innehållstyp: Publikationer