Din avgränsning ger 181 träffar.
-
2020:16 Estimates ofJ-integral and COD for circumferential through wall cracks under global bending including the effect of pipe end restraint
SSM perspective Background Leak-before-break (LBB) piping assessments have shown that piping systems can withstand long through-wall cracks before pipe rupture is expected. This is somewhat because pipe ends are restrained. In LBB assessments analyses are often performed for a pipe segment
Innehållstyp: Publikationer -
2020:12 Assessment of the QT-COOL coolant channel module against the PBF RIA 1-2 experiment
SSM perspective Background The fuel rod analysis program SCANAIR has been developed by IRSN (Institut de Radioprotection et de Sûreté Nucléaire) for analysis of reactivity initiated accidents (RIA) in light water reactors. The Swedish Radiation Safety Authority (SSM) has access to
Innehållstyp: Publikationer -
2020:13 Core data Research at Uppsala University
SSM perspective Background This project is to support a research group at Uppsala University in the research feld of nuclear data for applications. Nuclear data research is about measuring microscopic cross-sections and developing theoretical nuclear models to create evaluated nuclear data
Innehållstyp: Publikationer -
2020:11 Competency based assessments of Nuclear Power Plant controlroom operators
Experiences of development and first operational methodological and technical demonstrator application
Innehållstyp: Publikationer -
2020:07 Fibre Clogging in Nuclear Power Plants
SSM perspective Background Emergency core cooling systems in boiling- and pressurized water reactors use strainers. Their purpose is to out foreign material suspended in the cooling water so this material does not reach the reactor. After the 1992 event at Barsebäck nuclear power plant
Innehållstyp: Publikationer -
2020:02 Models for axial gas flow and mixing in LWR fuel rods
SSM perspective Background Fission gases inside a fuel rod plays an important role in the behaviour of the fuel, both during normal operation and during events and accidents. Fission gases are released from inside the fuel pellets to the gap between the pellet and the cladding tube and then flow
Innehållstyp: Publikationer -
2019:27 Effect of residual stress on ductile fracture at low primary loads – Numerical study
SSM perspective Background Present report is a continuation of earlier work reported in SSM2009:27 regarding an analysis strategy for fracture assessment of defects in ductile material and SSM2011:19 on the influence from residual stresses on crack initiation and ductile crack growth at high
Innehållstyp: Publikationer -
2019:25 Maskulinitet, risk och säkerhet vid ett svenskt kärnkraftverk
SSM perspektiv Bakgrund Likt anställda vid ett järnverk, ett pappersbruk eller en oljeplattform omges även personalen vid ett kärnkraftverk av olika slags risker som hanteras genom ett mer eller mindre lyckosamt säkerhetsarbete. Kärnkraften är en högriskbransch
Innehållstyp: Publikationer -
2019:23 Participation in the European Committee for Standardization's workshop regarding civil structures
SSM perspective Background During the period 2014-2018, a CEN1 workshop (Phase 2 Prospective Group 3 civil works) have been carried out. The aim of the workshop is to provide a base founded on the French standard in order to be able to establish a possible future European standard for the design
Innehållstyp: Publikationer -
2019:20 Assessment of structures subject to concrete pathologies (ASCET), phase 3
SSM perspective Background ASCET is an international research project initiated by WGIAGE1 OECD2 / NEA3. WGIAGE Concrete subgroup is a working group within the OECD / NEA whose task is to address issues concerning the maintenance of the integrity of concrete structures, proposals for general
Innehållstyp: Publikationer