Din avgränsning ger 140 träffar.
-
2009:17 Effect of Welding Residual Stresses on Crack Opening Displacement and Crack-Tip Parameters
Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to arrive at proper conclusions when assessing detected flaws, for inspection planning and for assessment of leak-before-break margins. The fracture mechanical treatment of weld...
Innehållstyp: Publikationer -
2009:16 Influence of Hardening Model on Weld Residual Stress Distribution
Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to arrive at proper conclusions when assessing detected flaws, for inspection planning and for assessment of leak-before-break margins. Therefore, it is very important to have...
Innehållstyp: Publikationer -
2009:15 Improvement and Validation of Weld Residual Stress Modelling Procedure
Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to arrive at proper conclusions when assessing detected flaws, for inspection planning and for assessment of leak-before-break margins. Therefore, it is very important to have...
Innehållstyp: Publikationer -
2009:12 Evaluating safety-critical organizations – emphasis on the nuclear industry
The regulator identified a few years ago a need for a better understanding of and a deeper knowledge on methods for evaluating safety critical organisations. There is a need for solid assessment methods in the process of management of organisational changes as well as in continuously performed assessment of organisations such as nuclear power plants. A considerable body of literature exists...
Innehållstyp: Publikationer -
2009:09 Analysis of three sets of SWIW tracer test data using a two-population complex fracture model for matrix diffusion and sorption
For the non-sorbing tracer uranine, both the finite and the semi-infinite populations play a distinct role in controlling BTC. For the sorbing tracers Cs and Rb the finite population does not saturate, but acts essentially semi-infinite, thus the BTC behaviour is comparable to that obtained for a model containing only a semi-infinite rock matrix. The ability to match BTC for both sorbing and...
Innehållstyp: Publikationer -
2009:07 Dependency Analysis Guidance Nordic/German Working Group on Common Cause Failure analysis
Phase 2...
Innehållstyp: Publikationer -
SSM Report 2008:01 A combined deterministic and probabilistic procedure for safety assessment of components with cracks – Handbook
SSM has supported research work for the further development of a previously developed procedure/handbook (SKI Report 99:49) for assessment of detected cracks and tolerance for defect analysis. During the operative use of the handbook it was identified needs to update the deterministic part of the procedure and to introduce a new probabilistic flaw evaluation procedure. Another identified need...
Innehållstyp: Publikationer -
2008:09 The Generalised Ecosystem Modelling Approach in radiological assessment
An independent modelling capability is required by SSI in order to evaluate dose assessments carried out in Sweden by, amongst others, SKB. The main focus is the evaluation of the long-term radiological safety of radioactive waste repositories for both spent fuel and low-level radioactive waste. To meet the requirement for an independent modelling tool for use in biosphere dose assessments,...
Innehållstyp: Publikationer -
2008:10 International Expert Review of SR-Can: Engineered Barrier Issues
The Swedish Nuclear Fuel and Waste Management Company (SKB) has recently submitted a license application for the construction of a spent fuel encapsulation plant. SKB plans to submit a further license application in 2009 for the construction of a repository for the disposal spent nuclear fuel. In connection with the first of these applications, SKB published a safety report, known as SR-Can,...
Innehållstyp: Publikationer -
2017:34 Human capability to cope with unexpected events
Background In the light of the Fukushima accident, it stood clear that the challenge of the unexpected is of great importance to both regulators and licensees. For SSM, as for many other national regulators, there was a selfevident need to learn more about the capabilities and actions of people when the unexpected arises and conditions are potentially extreme. A task group was set up within...
Innehållstyp: Publikationer