Din avgränsning ger 588 träffar.
-
2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark
Flow modelling using alternative assumptions regarding conceptual and parametric uncertainty in the spatial and structural relationships among fractures indicates elevated flow rates and groundwater velocities to deposition holes compared to SKB’s flow modelling results. Simulated sampling of fractures in boreholes does not indicate any reason to exclude the proposed spatial and structural...
Innehållstyp: Publikationer -
2011:12 Analysis of Barrier Performance: Modelling of Copper corrosion scenarios with and without buffer erosion
The purpose of this project was to develop a numerical modelling capacity to address the corrosion of the copper canister under gradually changing transport conditions caused by buffer erosion and removal of buffer mass. Due to the complexity of this task, such a model cannot be realistic in all respects, but the present effort should address the feasibility of solving numerical and...
Innehållstyp: Publikationer -
2011:11 Handling Interfaces and Time-varying Properties in Radionuclide Transport Models
Quintessa’s QPAC code has been used to investigate the Qeq approach. The conclusions from this simulation study are the following. The basic approach to calculating Qeq values is sound, however, narrow channels could lead to the same release as larger fractures with the same pore velocity, so a channel enhancement factor of √10 should be considered. A spalling zone that increases the area of...
Innehållstyp: Publikationer -
2011:10 Strålsäkerhetsmyndighetens granskning och utvärdering av SKB:s redovisning av Fud-program 2010
Enligt förordningen (1984:14) om kärnteknisk verksamhet (kärnteknikförordningen) ska Strålsäkerhetsmyndigheten (SSM) granska och utvärdera det program för forskning, utveckling och demonstration med mera (Fud-program) som reaktorinnehavarna enligt lagen (1984:3) om kärnteknisk verksamhet (kärntekniklagen) ska upprätta. Svensk Kärnbränslehantering...
Innehållstyp: Publikationer -
2011:09 Is Copper Immune to Corrosion When in Contact With Water and Aqueous Solutions?
The KBS-3concept implies that spent nuclear fuel is placed in copper canisters surrounded by clay and finally placed approximately 500 m down from surface into granitic bedrock, in order to isolate the spent nuclear fuel from humans and environment for very long time scales (i.e. millions of years). The concept is based on the multi-barrier principle, in this respect the barriers are the...
Innehållstyp: Publikationer -
2011:08 Workshop on Copper Corrosion and Buffer Erosion Stockholm 15-17 September 2010
In SSM:s preparation for reviewing SKB:s license application for disposal of spent nuclear fuel, a series of technical workshops have been conducted. The main purpose of this type of workshops is to get an overall understanding of the state of knowledge on interdisciplinary issues as well as of questions in the research front by inviting several experts. Previous workshops have addressed the...
Innehållstyp: Publikationer -
2011:07 Workshop on Regulatory Review and Safety Assessment Issues in Repository Licensing
The Swedish Radiation safety Authority (SSM) is currently developing project plans for the review of the Swedish Nuclear Fuel and Waste Management Co’s (SKB) planned license application for a spent nuclear fuel repository in Forsmark and an encapsulation plant in Oskarshamn. In support of the development of these project plans, SSM has carried out several international workshops during 2010...
Innehållstyp: Publikationer -
2011:06 Reliability Data Handbook for Piping Components in Nordic Nuclear Power Plants – R Book, Phase 2
The Nordic PSA Group (NPSAG) has undertaken to develop a piping reliability parameter handbook for use in risk-informed applications that involve the consideration of structural integrity of piping systems. The scope of the handbook is to establish high quality reliability parameters that account for the Nordic and worldwide service experience with safety-related and non-safety-related piping...
Innehållstyp: Publikationer -
2011:05 Overview and Evaluation of the NESC Projects for Fracture Assessments of Nuclear Components
The Network for Evaluation of Structural Components (NESC) was started in 1993 and since then six different projects have been carried out. A seventh NESC-project is still in progress. The overall objective of these projects has been to study the reliability of the entire process of structural integrity assessment within an international framework. The network is coordinated by the European...
Innehållstyp: Publikationer -
2011:04 Evaluation of the Technical Basis for New Proposals of Fatigue Design of Nuclear Components
During the recent years fatigue analysis procedures for nuclear components have been investigated. The most common method so far has been the American code ASME III. The basis for the current design procedures in ASME III is quite old and has now been evaluated against modern data leading to the proposal of modified design curves. Also the effect of the environment has been the subject of...
Innehållstyp: Publikationer