Din avgränsning ger 197 träffar.
-
2015:07 TEM-lamella lift-out from the crack tip region of Alloy 600 for high resolution electron microscopy examination
This report contributes to the development of a method for high-quality TEM lamella preparation from crack tip regions of nuclear materials. A standard compact tension (CT) specimen of Alloy 600 previously tested for stress corrosion crack growth in simulated PWR primary water was used to demonstrate the benefit of the proposed method. This report describes the procedure for cutting the CT...
Innehållstyp: Publikationer -
2015:09 PROSIR - Probabilistic Structural Integrity of a PWR Reactor Pressure Vessel
Following an OCDE round robin proposal, 16 participants from 9 countries (USA, Japan, Korea (6 participants), Sweden, Germany, Czech Republic, Spain, EC and France (3 participants)) have been involved in a round robin study called PROSIR, Probabilistic Structural Integrity of a PWR Reactor Pressure Vessel. The PROSIR project started already in 2003 and a final draft version of the main report...
Innehållstyp: Publikationer -
2015:11 Investigation of the Distribution of Phosphorus in Copper
Two copper alloys containing different amounts of phosphorus, 6 and 80 wtppm, respectively, have been investigated. The matrix of both alloys was analysed using atom probe tomography (APT). The matrix P concentration in the 80 wtppm P mate- rial was about the same as the bulk concentration and it was therefore concluded that the majority of the P atoms resides in the matrix. Grain boundaries...
Innehållstyp: Publikationer -
2015:10 SafePhase: Safety culture challenges in design, construction, installation and commissioning phases of large nuclear power projects
Different lifecycle phases of a nuclear power plant present new human-technology- organization challenges to regulators and licensees. Organizational processes and practices that have evolved in one phase of development might be dysfunctional for the next phase, and the definition of “good safety culture” in practice might be unclear. The objective of the SafePhase study is to improve the...
Innehållstyp: Publikationer -
2015:04 DiD-PSA: Development of a Framework for Evaluation of the Defence-in-Depth with PSA
The project declares an interpretation of the definitions of Defence in Depth given by IAEA which outline a framework to meet PSA. For each level of defence and combinations of levels, methods to give estimates from a PSA perspective are presented and discussed. One important result is the discussion of the basic definitions and the basis for defence-in-depth, as defined by IAEA, leading to...
Innehållstyp: Publikationer -
2014:28 Numerical simulation of ductile crack growth in residual stress fields
The study has shown on the capability of the cell model in capturing the effects on ductile tearing from limited pre-load levels and a residual stress field. Some of the conclusions are as follows: No distinctive influence on the material fracture toughness is observed from pre-loading (work hardening), both tensile and compressive, at room temperature of 1.5 or 3 % total strain. The cell...
Innehållstyp: Publikationer -
2014:21 Effects of additives on uranium dioxide fuel behavior
This report will form a basis for the reviews that SSM does when the license holders applies for use of nuclear fuel with additives. The report is also intended as a reference to the models that Quantum Technologies AB has developed. The report and the models will be a valuable source of information for SSM and other parties when discussing the performance of doped fuel. Ali Massih SSM...
Innehållstyp: Publikationer -
2014:20 An evaluation of high-temperature creep of zirconium alloys: data versus models
In this report Dr Massih presents correlations for creep in different phases of zirconium alloys and also presents a general solution to the difficulty of accurately describing the material properties in phase transition for several zirconium alloys. Based upon superplasticity relations, models are adapted to fit with experimental data for materials in transition regions. The creep models are...
Innehållstyp: Publikationer -
2014:19 Evaluation of the Halden IFA-650 loss-of-coolant accident experiments 5, 6 and 7
The analytical tools, which are fuel rod computer codes, that Quantum Technologies AB use and develop, contain models of several of the phenomena that are acting on the nuclear fuel (cladding temperature, fission gas driven pressure, strain and stress in the cladding, rod rupture, etc.) and how the separate effects interact in the complex integrated manner. The codes are under constant...
Innehållstyp: Publikationer -
2014:18 Evaluation of the Halden IFA-650 loss-of-coolant accident experiments 2, 3 and 4
The analytical tools, which are fuel rod computer codes, that Quantum Technologies AB use and develop, contain models of several of the phenomena that are acting on the nuclear fuel (cladding temperature, fission gas driven pressure, strain and stress in the cladding, rod rupture, etc.) and how the separate effects interact in the complex integrated manner. The codes are under constant...
Innehållstyp: Publikationer