Rapporter

Din avgränsning ger 60 träffar.

• 2014:29 Technical Note, Independent Modelling of Radionuclide Transport, Evaluation of Colloid Transport Modelling – Main Review Phase

  SKB excludes consideration of colloids originating inside the canister in its performance assessment on the basis of the filtration capability of the buffer material.  In the canister failure by corrosion scenario (central corrosion case), the buffer material is assumed eroded, and the filtration argument is not entirely valid for excluding modelling in-canister colloids.  In this Technical...

  Innehållstyp: Publikationer

• 2014:28 Numerical simulation of ductile crack growth in residual stress fields

  The study has shown on the capability of the cell model in capturing the effects on ductile tearing from limited pre-load levels and a residual stress field. Some of the conclusions are as follows: No distinctive influence on the material fracture toughness is observed from pre-loading (work hardening), both tensile and compressive, at room temperature of 1.5 or 3 % total strain. The cell...

  Innehållstyp: Publikationer

• 2014:26 Improved reference and relative dosimetry of small radiation therapy photon beams

  Data tables on detector corrections for beam output measurements are provided for a large number of detectors (small air and liquid ionization chambers, silicon diodes, TLD and alanine) manufactured by major vendors, for 6 MV photons from clinical accelerators and for two Leksell Gamma Knife® models. They have been calculated with the PENELOPE Monte Carlo system at an uncertainty of 0.1%.

  Innehållstyp: Publikationer

• 2014:27 Regulation applying to welding of pressure equipment – a comparative study

  The PED was in force in November 1999 and has been mandatory in European Union Member States since May 2002. Most of the standards referred to in the PED are relatively new although some of the standards were adopted in the early 1990s. On the other hand, the ASME B&PV Code has been used for a long time now and is the result of several decades of industrial experiences. The authors present...

  Innehållstyp: Publikationer

• 2014:25 En standardiserad svensk nomenklatur för strålbehandling

  Arbetet med att ta fram en standardiserad svensk nomenklatur för strålbehandling har i huvudsak utförts av en referensgrupp som har varit knuten till forskningsuppdraget. Referensgruppen har bestått av läkare och sjukhusfysiker från landets universitetssjukhus. Den framtagna standarden har harmoniserats med publicerade internationella standarder. I den här rapporten...

  Innehållstyp: Publikationer

• 2014:21 Effects of additives on uranium dioxide fuel behavior

  This report will form a basis for the reviews that SSM does when the license holders applies for use of nuclear fuel with additives. The report is also intended as a reference to the models that Quantum Technologies AB has developed. The report and the models will be a valuable source of information for SSM and other parties when discussing the performance of doped fuel. Ali Massih SSM...

  Innehållstyp: Publikationer

• 2014:24 Technical Note, Workshop on biosphere issues

  The objective of this workshop was to bring together experts in the field of radionuclide transport in the biosphere including non-human biota and dose assessment to discuss the findings of the detailed reviews performed during the main review phase and to identify any further biosphere review issues. This report describes the outcome of the workshop organized by SSM on Biosphere Issues that...

  Innehållstyp: Publikationer

• 2014:23 Technical Note, Workshop on Rock Mechanics Issues and their Implications for Groundwater Flow – Main Review Phase

  This report describes the outcome of the workshop organized by SSM on Rock Mechanics and Hydrogeology that was held in Stockholm on the 30/9 and 1/10, 2013. The report summarizes the issues discussed and extracts the essential viewpoints that have been expressed. It should not be considered as a comprehensive record of all the discussions at the workshop and individual statements made by...

  Innehållstyp: Publikationer

• 2014:22 Technical Note, Workshop on seismic hazard at Forsmark

  This report describes the outcome of the workshop organized by SSM on seismic hazard at Forsmark that was held in Stockholm on the 4 and 5 of June, 2013. The report summarizes the issues discussed and extracts the essential viewpoints that have been expressed. It should not be considered as a comprehensive record of all the discussions at the workshop and individual statements made by...

  Innehållstyp: Publikationer

• 2014:20 An evaluation of high-temperature creep of zirconium alloys: data versus models

  In this report Dr Massih presents correlations for creep in different phases of zirconium alloys and also presents a general solution to the difficulty of accurately describing the material properties in phase transition for several zirconium alloys. Based upon superplasticity relations, models are adapted to fit with experimental data for materials in transition regions. The creep models are...

  Innehållstyp: Publikationer