Rapporter

Din avgränsning ger 47 träffar.

• 2014:20 An evaluation of high-temperature creep of zirconium alloys: data versus models

  In this report Dr Massih presents correlations for creep in different phases of zirconium alloys and also presents a general solution to the difficulty of accurately describing the material properties in phase transition for several zirconium alloys. Based upon superplasticity relations, models are adapted to fit with experimental data for materials in transition regions. The creep models are...

  Innehållstyp: Publikationer

• 2013:32 Upparbetning av utbränt kärnbränsle - En studie med fokus på exportkontroll

  Rapporten beskriver principerna för upparbetning samt egenskaperna hos utbränt kärnbränsle där sammansättningen hos det i reaktorn bildade plutoniumet är av avgörande betydelse för kärnvapenframställning till skillnad från civil upparbetning. Rapporten går igenom ett antal upparbetningsmetoder, både äldre metoder samt nya,...

  Innehållstyp: Publikationer

• 2013:24 Modelling of nuclear fuel cladding under loss-of-coolant accident conditions

  We present a unified model for calculation of zirconium alloy fuel cladding rupture during a postulated loss-of-coolant accident in light water reactors. The model treats the Zr alloy solid-to-solid phase transformation kinetics, cladding creep deformation, oxidation and rupture as a function of temperature and time in an integrated fashion during the transient. The fuel cladding material...

  Innehållstyp: Publikationer

• 2012:61 Geochemical Constraints on Buffer Pore Water Evolution and Implications for Erosion

  Mineralogical data from the Forsmark Site show that smectite and calcite occur at all depths in Forsmark fractures, with no evidence for removal/dissolution by previous glacial episodes.  This natural analogue information implies that these minerals may not have been eroded/dissolved during previous glacial episodes. Available thermodynamic data suggest that repository-depth Forsmark...

  Innehållstyp: Publikationer

• 2012:11 Issues in the corrosion of copper in a Swedish high level nuclear waste repository

  The objective with this research project was to increase knowledge in the area of copper corrosion in the planned repository environment and obtain information on how copper corrosion evolves during the assessment period of 100 000 years.  The equilibrium chemical composition of groundwater close to the canister as a function of temperature has been calculated by use of a thermodynamics...

  Innehållstyp: Publikationer

• 2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen

  One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...

  Innehållstyp: Publikationer

• 2011:26 The influence of temperature and fluid pressure on the fracture network evolution around deposition holes of a KBS-3V concept at Forsmark, Sweden

  In preparation for the review of SKB’s license application for disposal of spent nuclear fuel, SSM is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock at about 500 m depth and embedded in clay. Thus, the rock, the clay and the copper canister...

  Innehållstyp: Publikationer

• 2011:16 Modelling of ultrasonic testing of cracks in cladding

  During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.

  Innehållstyp: Publikationer

• 2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark

  Flow modelling using alternative assumptions regarding conceptual and parametric uncertainty in the spatial and structural relationships among fractures indicates elevated flow rates and groundwater velocities to deposition holes compared to SKB’s flow modelling results. Simulated sampling of fractures in boreholes does not indicate any reason to exclude the proposed spatial and structural...

  Innehållstyp: Publikationer

• 2011:12 Analysis of Barrier Performance: Modelling of Copper corrosion scenarios with and without buffer erosion

  The purpose of this project was to develop a numerical modelling capacity to address the corrosion of the copper canister under gradually changing transport conditions caused by buffer erosion and removal of buffer mass. Due to the complexity of this task, such a model cannot be realistic in all respects, but the present effort should address the feasibility of solving numerical and...

  Innehållstyp: Publikationer