Din avgränsning ger 262 träffar.
-
2017:13 Monte Carlo patient-specific pre-treatment QA system for volumetric modulated arc therapy
Background The clinical use of volumetric modulated arc therapy (VMAT) has augmented rapidly since it became commercially available. As a result, the need for comprehensive quality assurance (QA) has increased. Current practices in Sweden normally compare the delivered dose with the planned dose based on measurements with different methods, for instance: portal dosimetry, point dose...
Innehållstyp: Publikationer -
2017:11 Extended Common Load Model: A tool for dependent failure modelling in highly redundant structures
Background The treatment of dependent failures is one of the most controversial subjects in reliability and risk analyses. The difficulties are specially underlined in the case of highly redundant systems, when the number of redundant components or trains exceeds four. The Common Load Model (CLM), originally defined in the 70’ies, differs from other CCF models, as it relies on a specific...
Innehållstyp: Publikationer -
2017:09 Evaluation of the Swedish participation in the Nordic Nuclear Safety Research (NKS) collaboration
Background NKS is a Nordic collaboration promoting cooperation on nuclear safety and emergency preparedness research. The research program is primarily funded by Nordic radiation safety authorities and responsible ministries. The main purpose of NKS is to finance joint Nordic activities and initiatives, including seminars and workshops, technical reports, exercises and scientific articles.
Innehållstyp: Publikationer -
2017:05 Robust structural verification of pressurized nuclear components subjected to ratcheting, part two – stress-strain curves for cyclic elastoplastic analysis.
Background Pressurized components in nuclear applications that are subjected to cyclic loading may exhibit progressive deformation, so called structural ratcheting. If the component is made out of a material that are deformation hardening, it may also exhibit material ratcheting. The combined effects of structural- and material ratcheting are not taken into account in the methods and material...
Innehållstyp: Publikationer -
2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C
Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile...
Innehållstyp: Publikationer -
2016:39 Recommended residual stress profiles for stainless steel pipe welds
Background The Swedish Radiation Safety Authority (SSM) and the Swedish nuclear power plant owners have financed Inspecta Technology in Sweden to analyze stainless steel pipe welds to obtain good estimations of weld residual stress (WRS) distributions. Detailed knowledge of the residual stress field in different types of welds is important since they can have substantial influence on...
Innehållstyp: Publikationer -
2016:37 PARTRIDGE project: Review and evaluation of the probabilistic fracture mechanics code PRO-LOCA
Background The Swedish Radiation Safety Authority (SSM) and the Swedish nuclear power plant owners have financed Inspecta Technology in Sweden to evaluate the PRO-LOCA code. It is a computer code, developed by Battelle in the USA, in which the leak- and rupture probabilities of piping in nuclear power plants are analysed. The pipe systems may contain the damage mechanisms fatigue and/or...
Innehållstyp: Publikationer -
2016:28 Fatigue fracture surface characterization and investigation
Background In a previous study (SSM research report 2015:38) fatigue experiments were performed on welded austenitic stainless steel piping components. The fatigue experiments offer an opportunity to examine the obtained fatigue cracks with an optical microscope. Objective The present study performs a fractographical examination of the obtained fatigue cracks with the aim of determine where...
Innehållstyp: Publikationer -
2016:27 Validation of fatigue fracture mechanics approaches
Background In a previous study (SSM research report 2015:38) fatigue experiments were performed on welded austenitic stainless steel piping components. The fatigue experiments offer an opportunity to evaluate fatigue flaw tolerance assessments used in industry, which are based on the fracture mechanical approach implemented in ProSACC. Objective The present study aims to validate the used...
Innehållstyp: Publikationer -
2016:29 Evaluation of the Swedish participation in the Halden Reactor Project 2006–2014
This is a report on the evaluation of the Swedish participation in the Halden Reactor Project 2006-2014. The study has consisted in evaluating the types and extent of added value from the Swedish participation in the Halden Reactor Project, and to determine what additional added value the participation could supply for the Swedish authority. It can be concluded from the study that the impacts...
Innehållstyp: Publikationer