Rapporter

Din avgränsning ger 197 träffar.

• 2006:36 Mechanical Integrity of Canisters Using a Fracture Mechanics Approach

  This report presents the methods and results of a research project for Swedish Nuclear Power Inspectorate (SKI) about numerical modeling of mechanical integrity of cast-iron canisters for the final disposal of spent nuclear fuel in Sweden, using combined boundary element (BEM) and finite element (FEM) methods The objectives of the project are: 1) to investigate the possibility of initiation...

  Innehållstyp: Publikationer

• 2005:60 Research and Service Experience with Environmentally-Assisted Cracking in Carbon and Low-Alloy Steels in High-Temperature Water

  In this report, the most relevant aspects of research and service experience with environmentally assisted cracking of carbon and low-alloy steels in high-temperature water are reviewed, with special emphasis on the primary pressure-boundary components of boiling water reactors. The main factors controlling the susceptibility to environmentally assisted cracking under light water reactor...

  Innehållstyp: Publikationer

• 2005:61 Review and Assessment of SCC Experiments with RPV Steels in Oskarshamn 2 and 3 (ABB Report SBR 99-020)

  Although the extent of cracking was rather surprising for a bolt-loaded specimen, the average stress corrosion crack growth rate of 0.5 mm/year over the five-year testing period does not represent an immediate concern. The overwhelming part of crack growth can have occurred during a 20 day chloride transient during the third year of exposure because of a condenser leakage after an outage. The...

  Innehållstyp: Publikationer

• 02:4 Qualification of Electrical Components in Nuclear Power Plants. Management of Ageing

  The work was finished and reported in Swedish in a limited publication 2000, Ingemansson Rapport H-14061-r-I. As the performed work was regarded to be of more general interest it is published again as a research report by the Swedish Nuclear Power Inspectorate. To be used in the international cooperation in nuclear safety it was also translated into English by the inspectorate, which is this...

  Innehållstyp: Publikationer

• 2001:23 Interactions of Severe Accident Researchand Regulatory Positions (ISARRP)

  This project, started on April 1, 1999, had the specific objectives of determining whether; (i) the focus of the severe accidents (SA) research is consistent with that of the regulatory authorities, (ii) the results obtained so far by SA research satisfy the regulatory concerns, (iii) the future programs, envisaged will address the potential regulatory needs into next century, and (iv) how...

  Innehållstyp: Publikationer

• 1999:13 Determination of the Neutron and Photon Dose Equivalent at Work Places in Nuclear Facilities of Sweden

  Various mixed neutron-photon fields at workplaccs in the containment of pressurised water reactors and in the vicinity of transport containers with spent fuel elements were investigated with spectrometers and dosimeters.The spectral neutron fluences evaluated from measurements with multisphere systems were recommended to be used for the calculation of dosimetric reference values for...

  Innehållstyp: Publikationer

• 1997:40 Aging of Electrical Components in Nuclear Power Plants

  The purpose of the study reported in SKl Technical Report 93:39 was to evaluate qualification methods for application to components intended to be installed in the containment of nuclear power plants. The study included application of Arrhenius' criterion for thermal aging as well as methodologies for updating (curve-matching, ongoing qualification). This report reviews the results of...

  Innehållstyp: Publikationer

• 1997:12 Study of International Published Experiences in Joining Copper and Copper-alloys

  This study has revealed a number of joining processes to be used when manufacturing copper-canisters for the final storage of high level nuclear waste. However, the decision on which material and which joining process to be used has to be based on the design criterions. The welding procedure has to be qualified i.e, it shall be demonstrated whether the procedure is capable of fulfilling...

  Innehållstyp: Publikationer

• 1996:70 Risks from Nuclear Waste

  The first part of this review discusses the importance of risk. Man seems to have a longing for risks, like a part of the human nature. If risks are missing, they have to be invented, as needed parts in the emotional attraction of sports, amusement parks, traveling, etc.; this is the emotional part of risk. There is also a rational part of risk, in selecting such objects in ordinary life big...

  Innehållstyp: Publikationer

• 96:51 The Flooding Incident at the Ågesta Pressurized Heavy Water Nuclear Power Plant

  This report is a Master's thesis in Nuclear Reactor Engineering to be submitted to the SKi (Swedish Nuclear Power Inspectorate). The work has been performed at the Division of Nuclear Power Safety, KTH,Stockholm. It is an independent investigation of the consequences of the flooding incident at the Agesta HPWR, in Stockholm, Sweden, which occurred on the 1st of May 1969. The issue was raised...

  Innehållstyp: Publikationer