Rapporter

Din avgränsning ger 23 träffar.

• 2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen

  One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...

  Innehållstyp: Publikationer

• 2011:33 Mathematical modelling of ultrasonic testing of components with defects close to a non-planar surface

  The report describes work that has been performed in order to model ultrasonic testing of components that contain a defect close to a non-planar surface. The studies have been performed in both 2D and 3D, and in 2D in both the anti-plane (SH) and the in-plane (P-SV). The results show that the presence of a non-planar back wall can reduce the detectability of defects close to the surface. The...

  Innehållstyp: Publikationer

• 2011:30 A fatigue analysis including environmental effects for a pipe system in a Swedish BWR

  The effect of the environment on fatigue design has been the subject of intense study in USA, Japan and elsewhere. Several reports indicate a potentially large influence of the environment, leading to the proposal of entirely new analysis procedures. SSM has in an earlier project sponsored research to evaluate the technical basis for these proposals, see SSM Research Report 2011:04. In the...

  Innehållstyp: Publikationer

• 2011:29 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 17

  This report constitutes Stage 17 of a long-term research and development program concerning the development of diagnostics and monitoring methods for nuclear reactors. Results up to Stage 16 were reported in SKI and SSM reports, as listed below and in the Summary. The results have also been published in international journals and have been included in both licentiate- and doctor’s degrees.

  Innehållstyp: Publikationer

• 2011:26 The influence of temperature and fluid pressure on the fracture network evolution around deposition holes of a KBS-3V concept at Forsmark, Sweden

  In preparation for the review of SKB’s license application for disposal of spent nuclear fuel, SSM is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock at about 500 m depth and embedded in clay. Thus, the rock, the clay and the copper canister...

  Innehållstyp: Publikationer

• 2011:25 Report from SSM’s scientific council on ionizing radiation within oncology, 2010

  In this report, three main areas have been highlighted: quality assurance (QA), quality control (QC) and late side-effects including the risk of radiation-induced secondary malignancies. These areas reflect the ongoing activities in leading international radiotherapy organisations. Specific attention is given to new technologies such as image-guided radiotherapy and intensity-modulated...

  Innehållstyp: Publikationer

• 2011:20 A Guidebook for Evaluating Organizations in the Nuclear Industry – an example of safety culture evaluation

  Organizations in the nuclear industry need to maintain an overview on their vulnerabilities and strengths with respect to safety. Systematic periodical self- assessments are necessary to achieve this overview. This guidebook provides suggestions and examples to assist power companies but also external evaluators and regulators in carrying out organizational evaluations. Organizational...

  Innehållstyp: Publikationer

• 2011:19 Experimental evaluation of influence from residual stresses on crack initiation and ductile crack growth at high primary loads

  Cracked components are usually subjected to loads causing both primary and secondary stresses, e.g. welding components. Engineering assessment approaches, such as the ASME XI code and the R6 procedure, are commonly used to conduct integrity assessment of such components. There has been an ongoing debate how to treat secondary stresses using engineering assessment methods. The nature of these...

  Innehållstyp: Publikationer

• 2011:17 Structural Health Monitoring of Piping in Nuclear Power Plants – A Review of Efficiency of Existing Methods

  SSM needs to acquire knowledge about new applied Non-Destructive Engineering (NDE) techniques and their efficiency. One area that is discussed more frequently is Structural Health Monitoring (SHM). SSM needs to investigate the international experiences of SHM from the nuclear industry. SSM also wants to have more information about the capabilities and the limitations of NDE methods The first...

  Innehållstyp: Publikationer

• 2010:36 Guidance for the Definition and Application of Probabilistic Safety Criteria

  Safety goals are defined in different ways in different countries and also used differently. Many countries are presently developing them in connection to the transfer to risk-informed regulation of both operating nuclear power plants (NPP) and new designs. However, it is far from self-evident how probabilistic safety criteria should be defined and used. On one hand, experience indicates that...

  Innehållstyp: Publikationer