Din avgränsning ger 156 träffar.
-
2014:09 Further Development of the Core Simulator CORE SIM: Extension to coupled capabilities for BWRs
The developed tool is fully MatLab based and requires a set of input data from a commercial static core simulator. The driving perturbation can be specified both as a perturbation in thermo-hydraulic parameters or directly as a perturbation in macroscopic cross-sections. As output, the 3-dimensional spatial distribution of the noise in coolant density, pressure, enthalpy, inlet velocity, fuel...
Innehållstyp: Publikationer -
2014:01 Cost Estimating for Decommissioning Nuclear Reactors in Sweden
In Sweden, decommissioning cost estimates are core inputs to the process of calculating licensee contributions to the Swedish national fund for radioactive waste management and decommissioning. Under the present system, the decommissioning cost estimates are produced by licensees every three years and formally submitted to the Swedish Radiation Safety Authority (SSM), which reviews the...
Innehållstyp: Publikationer -
2013:29 Regulatory Approaches in Nuclear Power Supervision
The objective of this follow-up study was to support SSM in further understanding regulatory approaches and how they can be combined as part of effective strategies. The survey was intended to assist SSM in identifying current standards, experiences, and practices in the regulation of nuclear power plants. The results will also be valuable for the participating authorities as well as other...
Innehållstyp: Publikationer -
2013:24 Modelling of nuclear fuel cladding under loss-of-coolant accident conditions
We present a unified model for calculation of zirconium alloy fuel cladding rupture during a postulated loss-of-coolant accident in light water reactors. The model treats the Zr alloy solid-to-solid phase transformation kinetics, cladding creep deformation, oxidation and rupture as a function of temperature and time in an integrated fashion during the transient. The fuel cladding material...
Innehållstyp: Publikationer -
2013:10 Qualification of Electrical Equipment in Nuclear Power Plants - Management of ageing
The purpose of this report is to describe programs and tools for assessment of accomplished and documented qualification with respect to ageing of electrical equipment and for development of complimentary ageing management programs. In addition to description of complete programs for management of ageing, tools for validation of the status with regard to ageing of installed (“old”) equipment...
Innehållstyp: Publikationer -
2013:09 An Application of the Functional Resonance Analysis Method (FRAM) to Risk Assessment of Organisational Change
The objective of this study was to demonstrate an alternative approach to risk assessment of organisational changes, based on the principles of resilience engineering. The approach in question was the Functional Resonance Analysis Method (FRAM). Whereas established approaches focus on risks coming from failure or malfunctioning of components, alone or in combination, resilience engineering...
Innehållstyp: Publikationer -
2013:08 Licensing of safety critical software for nuclear reactors
– Common position of seven European nuclear regulators and authorised technical support organisations...
Innehållstyp: Publikationer -
2013:04 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 18
The program executed in Stage 18 consists of the following three parts: Application of CoreSim with a two-dimensional model of vibrating fuel assemblies, for the calculation of ex-core detector noise throughout a fuel cycle; An investigation of the neutron noise, induced by propagating perturbations, in various thermal and fast reactor systems, in two-group theory; A consistent derivation of...
Innehållstyp: Publikationer -
2013:01 Validation of Weld Residual Stress Modeling in the NRC International Round Robin Study
Weld residual stresses (WRS) have a large influence on the behavior of cracks growing under normal operation loads and on the leakage flow from a through-wall crack. Accurate prediction on weld residual stresses is important to make proper decisions when cracks in weld joints are detected. During the latest years, there has been a strong development in both analytical procedures to...
Innehållstyp: Publikationer -
2012:70 Process Parameters Affecting Inhomogeneity of Material Microstructure
There’s been a tremendous change in the number, product types, locations, equipment, and manufacturing capabilities of stainless steel producers from the late 1960’s to present. This reconfiguration of the global steel industry occurred between the early 1970’s to the mid 1980’s and continues today. These changes have produced a loss in manufacturing flexibility, due to the inherent...
Innehållstyp: Publikationer