Filtered generated 57 hits.
-
2013:28 Brine intrusion by upconing for a high-level nuclear waste repository at Forsmark. Scoping calculations
SSM currently reviews a license application for a spent nuclear fuel repository that is proposed to be located at Forsmark, Sweden. The repository is to be situated at 500 m depth in the rock and copper canisters are deposited in holes excavated from the tunnel system. To protect the canisters they are surrounded by a bentonite clay buffer, which is to swell when getting in contact with...
Content type: Publications -
2012:71 Identification of Brittle Deformation Zones and Weakness Zones
In preparation for the review of Swedish Nuclear Fuel and Waste Management Company’s (SKB) license application for disposal of spent nuclear fuel, Swedish Radiation Safety Authority (SSM) is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock...
Content type: Publications -
2012:61 Geochemical Constraints on Buffer Pore Water Evolution and Implications for Erosion
Mineralogical data from the Forsmark Site show that smectite and calcite occur at all depths in Forsmark fractures, with no evidence for removal/dissolution by previous glacial episodes. This natural analogue information implies that these minerals may not have been eroded/dissolved during previous glacial episodes. Available thermodynamic data suggest that repository-depth Forsmark...
Content type: Publications -
2012:11 Issues in the corrosion of copper in a Swedish high level nuclear waste repository
The objective with this research project was to increase knowledge in the area of copper corrosion in the planned repository environment and obtain information on how copper corrosion evolves during the assessment period of 100 000 years. The equilibrium chemical composition of groundwater close to the canister as a function of temperature has been calculated by use of a thermodynamics...
Content type: Publications -
2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen
One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...
Content type: Publications -
2011:26 The influence of temperature and fluid pressure on the fracture network evolution around deposition holes of a KBS-3V concept at Forsmark, Sweden
In preparation for the review of SKB’s license application for disposal of spent nuclear fuel, SSM is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock at about 500 m depth and embedded in clay. Thus, the rock, the clay and the copper canister...
Content type: Publications -
2011:12 Analysis of Barrier Performance: Modelling of Copper corrosion scenarios with and without buffer erosion
The purpose of this project was to develop a numerical modelling capacity to address the corrosion of the copper canister under gradually changing transport conditions caused by buffer erosion and removal of buffer mass. Due to the complexity of this task, such a model cannot be realistic in all respects, but the present effort should address the feasibility of solving numerical and...
Content type: Publications -
2011:11 Handling Interfaces and Time-varying Properties in Radionuclide Transport Models
Quintessa’s QPAC code has been used to investigate the Qeq approach. The conclusions from this simulation study are the following. The basic approach to calculating Qeq values is sound, however, narrow channels could lead to the same release as larger fractures with the same pore velocity, so a channel enhancement factor of √10 should be considered. A spalling zone that increases the area of...
Content type: Publications -
2011:09 Is Copper Immune to Corrosion When in Contact With Water and Aqueous Solutions?
The KBS-3concept implies that spent nuclear fuel is placed in copper canisters surrounded by clay and finally placed approximately 500 m down from surface into granitic bedrock, in order to isolate the spent nuclear fuel from humans and environment for very long time scales (i.e. millions of years). The concept is based on the multi-barrier principle, in this respect the barriers are the...
Content type: Publications -
2011:08 Workshop on Copper Corrosion and Buffer Erosion Stockholm 15-17 September 2010
In SSM:s preparation for reviewing SKB:s license application for disposal of spent nuclear fuel, a series of technical workshops have been conducted. The main purpose of this type of workshops is to get an overall understanding of the state of knowledge on interdisciplinary issues as well as of questions in the research front by inviting several experts. Previous workshops have addressed the...
Content type: Publications