Showing 738
-
2017:27e Review of Swedish emergency planning zones and distances
ESS research facility Summary On 22 October 2015, the Government of Sweden commissioned the Swedish Radiation Safety Authority (SSM) to, in consultation with the Swedish Civil Contingencies Agency (MSB), relevant county administrative boards and the other authorities and stakeholders concerned, perform a review of emergency planning zones and emergency planning distances applying to...
Content type: Publications -
2017:25 Evaluation of weld fatigue reduction in austenitic stainless steel pipe components
Background The performed investigation is a continuation of the work performed in SSM 2015:38 where fatigue tests were performed on pressurized welded austenitic stainless steel piping components. The specimens were subjected to a realistic variable amplitude loading with mainly reversed bending deformation and particular focus on high cycle fatigue. The previous fatigue results were quite...
Content type: Publications -
Information materials
Content type: Publications -
Forms
Content type: Publications -
Reports
date_desc...
Content type: Publications -
Regulations
About the regulations in English date_desc Some of the Swedish Radiation Safety Authority’s regulations (SSMFS) are available in English. The translations are unofficial versions of the Authority’s regulations. In the event of any discrepancy between the Swedish and English versions, the Swedish original will take precedence. The Authority's regulations in Swedish...
Content type: Publications -
2017:22 Effect of weld repairs on residual stresses in nickel base dissimilar metal welds
Background The driving force for crack growth near welds in nuclear application piping may arise from weld residual stresses. Experience from nondestructive examination show that cracks in dissimilar metal welds are often found near weld repairs. The repair welding may affect the residual stresses through e.g. increased tensile stresses and increased plastic straining on the surfaces of the...
Content type: Publications -
2017:20 Assessment of inertia effects on transient clad-to-coolant heat transfer and coolant flow under reactivity initiated accidents
In this report, simple hydrodynamic models are used for studying the effects of coolant inertia on fuel-to-coolant heat transfer and coolant flow under reactivity initiated accidents in light water reactors. The objective is to assess if the inertia effects are important enough to warrant modification of QT-COOL, a coolant channel module for two-phase flow that has recently been implemented as...
Content type: Publications -
2017:19 Numerical simulations of headed anchors break in reinforced and non-reinforced concrete structures, Phase 2
Background In the design of anchorage equipment in concrete structures the beneficial effects of reinforcement are, in most cases, not considered. The American ASCI 349-06 code opens up for a more detailed analysis where the beneficial impact of reinforcement on anchor capacity can be taken into account. How this analysis can be done is, however, not explicitly described in the code. The...
Content type: Publications -
2017:18 FEM analysis of the mechanical integrity for the canister intended for storage of spent nuclear fuel with regard to copper creep ductility
Background For final storage of spent nuclear fuel it is suggested by the Swedish nuclear fuel and waste management company (SKB) to emplace the nuclear fuel into copper canisters which are surrounded by bentonite clay at approximately 500 meters’ depth into granitic rock. After emplacement of the canisters Bentonite swelling due to water saturation and hydrostatic pressure build up the...
Content type: Publications