Filtered generated 22 hits.
-
2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen
One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...
Content type: Publications -
2011:33 Mathematical modelling of ultrasonic testing of components with defects close to a non-planar surface
The report describes work that has been performed in order to model ultrasonic testing of components that contain a defect close to a non-planar surface. The studies have been performed in both 2D and 3D, and in 2D in both the anti-plane (SH) and the in-plane (P-SV). The results show that the presence of a non-planar back wall can reduce the detectability of defects close to the surface. The...
Content type: Publications -
2011:31 Allocation of Decommissioning and Waste Liabilities
A crucial task for the present generations is to ensure that environmental liabilities are identified sufficiently well so that it may be possible to accumulate the corresponding necessary financial assets in the Swedish Nuclear Waste Fund. Adequate funding will provide forthcoming generation’s with the financial means to decommission and dismantle older nuclear facilities that are part of...
Content type: Publications -
2011:30 A fatigue analysis including environmental effects for a pipe system in a Swedish BWR
The effect of the environment on fatigue design has been the subject of intense study in USA, Japan and elsewhere. Several reports indicate a potentially large influence of the environment, leading to the proposal of entirely new analysis procedures. SSM has in an earlier project sponsored research to evaluate the technical basis for these proposals, see SSM Research Report 2011:04. In the...
Content type: Publications -
2011:29 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 17
This report constitutes Stage 17 of a long-term research and development program concerning the development of diagnostics and monitoring methods for nuclear reactors. Results up to Stage 16 were reported in SKI and SSM reports, as listed below and in the Summary. The results have also been published in international journals and have been included in both licentiate- and doctor’s degrees.
Content type: Publications -
2011:26 The influence of temperature and fluid pressure on the fracture network evolution around deposition holes of a KBS-3V concept at Forsmark, Sweden
In preparation for the review of SKB’s license application for disposal of spent nuclear fuel, SSM is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock at about 500 m depth and embedded in clay. Thus, the rock, the clay and the copper canister...
Content type: Publications -
2011:22 Infiltration of dilute groundwaters and resulting groundwater compositions at repository depth
The planned Swedish concept for final disposal of spent nuclear fuel includes copper canisters placed in deposition holes at about 500 m depth in granitic bedrock. The copper canisters will be surrounded by bentonite buffer with the objective of inhibiting groundwater flow adjacent to the canister. It has been discovered that dilute glacial melt-water may induce erosion of the buffer material.
Content type: Publications -
2011:21 Workshop on spent fuel performance and radionuclide chemistry -Rånäs 2010: Assessment of some outstanding issues
The safety assessment for final disposal of spent nuclear fuel has to comprehensively address the stage when containment barriers have failed and when radionuclide releases occur to the surrounding groundwater at repository depth. Essential processes for estimating risk/dose related to this scenario involve the release of radionuclide from the spent fuel surfaces due to radio-lytic oxidative...
Content type: Publications -
2011:20 A Guidebook for Evaluating Organizations in the Nuclear Industry – an example of safety culture evaluation
Organizations in the nuclear industry need to maintain an overview on their vulnerabilities and strengths with respect to safety. Systematic periodical self- assessments are necessary to achieve this overview. This guidebook provides suggestions and examples to assist power companies but also external evaluators and regulators in carrying out organizational evaluations. Organizational...
Content type: Publications -
2011:19 Experimental evaluation of influence from residual stresses on crack initiation and ductile crack growth at high primary loads
Cracked components are usually subjected to loads causing both primary and secondary stresses, e.g. welding components. Engineering assessment approaches, such as the ASME XI code and the R6 procedure, are commonly used to conduct integrity assessment of such components. There has been an ongoing debate how to treat secondary stresses using engineering assessment methods. The nature of these...
Content type: Publications