Filtered generated 9 hits.
-
2020:16 Estimates ofJ-integral and COD for circumferential through wall cracks under global bending including the effect of pipe end restraint
SSM perspective Background Leak-before-break (LBB) piping assessments have shown that piping systems can withstand long through-wall cracks before pipe rupture is expected. This is somewhat because pipe ends are restrained. In LBB assessments analyses are often performed for a pipe segment uncoupled from the piping system, as pipe ends are assumed unrestrained. This assumption is conservative...
Content type: Publications -
2020:12 Assessment of the QT-COOL coolant channel module against the PBF RIA 1-2 experiment
SSM perspective Background The fuel rod analysis program SCANAIR has been developed by IRSN (Institut de Radioprotection et de Sûreté Nucléaire) for analysis of reactivity initiated accidents (RIA) in light water reactors. The Swedish Radiation Safety Authority (SSM) has access to SCANAIR in exchange for annual contributions for its further development. This ensures a possibility...
Content type: Publications -
2020:13 Core data Research at Uppsala University
SSM perspective Background This project is to support a research group at Uppsala University in the research field of nuclear data for applications. Nuclear data research is about measuring microscopic cross-sections and developing theoretical nuclear models to create evaluated nuclear data libraries. These nuclear data libraries are used in different applications such as, nuclear...
Content type: Publications -
2020:11 Competency based assessments of Nuclear Power Plant controlroom operators
Experiences of development and first operational methodological and technical demonstrator application...
Content type: Publications -
2020:07 Fibre Clogging in Nuclear Power Plants
SSM perspective Background Emergency core cooling systems in boiling- and pressurized water reactors use strainers. Their purpose is to out foreign material suspended in the cooling water so this material does not reach the reactor. After the 1992 event at Barsebäck nuclear power plant when the strainers of the emergency cooling system was clogged due to fibers in the cooling water,...
Content type: Publications -
2020:05 General data in accordance with the requirements in Article 37 of the Euratom Treaty
Decommissioning of the nuclear reactors Ringhals 1 and Ringhals 2 in Sweden...
Content type: Publications -
2020:04 Recent Research on EMF and Health Risk, Fourteenth report from SSM’s Scientific Council on Electromagnetic Fields, 2019
SSM perspective Background The Swedish Radiation Safety Authority’s (SSM) Scientific Council on electromagnetic Fields monitors current research on potential health risks in relation to exposure to electromagnetic fields and provides the Authority with advice on assessing possible health risks. The Council gives guidance when the Authority must give an opinion on policy matters when...
Content type: Publications -
2020:02 Models for axial gas flow and mixing in LWR fuel rods
SSM perspective Background Fission gases inside a fuel rod plays an important role in the behaviour of the fuel, both during normal operation and during events and accidents. Fission gases are released from inside the fuel pellets to the gap between the pellet and the cladding tube and then flow to the plenum volume at the top of the fuel rod. In high burnup fuel, this axial flow to the...
Content type: Publications -
2020:01 Sulphide-induced stress corrosion cracking and hydrogen absorption incopper exposed to sulphide and chloride containing deoxygenated water at 90°C
SSM perspective Background The concept that the Swedish nuclear power industry plans to utilise for the final disposal spent nuclear fuel is called KBS-3 method, which is based on three different barriers to prevent spreading of radioactive substances: copper canisters, bentonite buffers and the surrounding Swedish bedrock. In the current KBS-3 design, the spent nuclear fuel will be placed in...
Content type: Publications
Go to page:
-
1 (current page)