Filtered generated 296 hits.
-
2017:27e Review of Swedish emergency planning zones and distances
ESS research facility Summary On 22 October 2015, the Government of Sweden commissioned the Swedish Radiation Safety Authority (SSM) to, in consultation with the Swedish Civil Contingencies Agency (MSB), relevant county administrative boards and the other authorities and stakeholders concerned, perform a review of emergency planning zones and emergency planning distances applying to...
Content type: Publications -
2017:13 Monte Carlo patient-specific pre-treatment QA system for volumetric modulated arc therapy
Background The clinical use of volumetric modulated arc therapy (VMAT) has augmented rapidly since it became commercially available. As a result, the need for comprehensive quality assurance (QA) has increased. Current practices in Sweden normally compare the delivered dose with the planned dose based on measurements with different methods, for instance: portal dosimetry, point dose...
Content type: Publications -
2017:37 Non-Ionising Radiation in Swedish Health Care
Jonna Wilén, Kjell Hansson Mild, Ronnie Lundström SSM English...
Content type: Publications -
2013:28 Brine intrusion by upconing for a high-level nuclear waste repository at Forsmark. Scoping calculations
SSM currently reviews a license application for a spent nuclear fuel repository that is proposed to be located at Forsmark, Sweden. The repository is to be situated at 500 m depth in the rock and copper canisters are deposited in holes excavated from the tunnel system. To protect the canisters they are surrounded by a bentonite clay buffer, which is to swell when getting in contact with...
Content type: Publications -
2012:71 Identification of Brittle Deformation Zones and Weakness Zones
In preparation for the review of Swedish Nuclear Fuel and Waste Management Company’s (SKB) license application for disposal of spent nuclear fuel, Swedish Radiation Safety Authority (SSM) is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock at...
Content type: Publications -
2015:37 Models for axial relocation of fragmented and pulverized fuel pellets in distending fuel rods and its effects on fuel rod heat load
Haverifall med kylmedelsförlust (LOCA) i lättvattenreaktorer kan leda till överhettning av bränslestavar, utvidgning av stavarnas kapslingsrör, samt axiell omflyttning av bränslekutsfragment i de delar av stavarna som expanderat. Bränsleomflyttningen kan koncentrera värmebelastningen till en begränsad del av stavarna och därigenom öka risken...
Content type: Publications -
2015:25 Design Guide for Nuclear Civil Structures (DNB)
The Swedish Radiation Safety Authority (SSM) and the Swedish licensees have previously in a jointly funded research project developed a design guide for civil structures at Swedish nuclear facilities to be based on Eurocodes, DNB. The report was published in January 2014 as SSM Report 2014:06. To further improve DNB and to ensure that the fundamentals of the recommendations will be applied...
Content type: Publications -
2012:61 Geochemical Constraints on Buffer Pore Water Evolution and Implications for Erosion
Mineralogical data from the Forsmark Site show that smectite and calcite occur at all depths in Forsmark fractures, with no evidence for removal/dissolution by previous glacial episodes. This natural analogue information implies that these minerals may not have been eroded/dissolved during previous glacial episodes. Available thermodynamic data suggest that repository-depth Forsmark...
Content type: Publications -
2005:60 Research and Service Experience with Environmentally-Assisted Cracking in Carbon and Low-Alloy Steels in High-Temperature Water
In this report, the most relevant aspects of research and service experience with environmentally assisted cracking of carbon and low-alloy steels in high-temperature water are reviewed, with special emphasis on the primary pressure-boundary components of boiling water reactors. The main factors controlling the susceptibility to environmentally assisted cracking under light water reactor...
Content type: Publications -
1995:19 Non-destructive Assay of Spent BWR Fuel with High-resolution Gamma-ray Spectroscopy
A method, based on high-resolution gamma-ray spectroscopy, has been developed for verification of burnup, cooling time, power history and, to some extent, the initial enrichment of spent BWR fuel. It is shown that, provided that the power history is known and corrected for, bumup and cooling time can be verified with accuracies within 3% and 60 days, respectively, for cooling times up to about...
Content type: Publications