Filtered generated 209 hits.
-
2017:27e Review of Swedish emergency planning zones and distances
ESS research facility Summary On 22 October 2015, the Government of Sweden commissioned the Swedish Radiation Safety Authority (SSM) to, in consultation with the Swedish Civil Contingencies Agency (MSB), relevant county administrative boards and the other authorities and stakeholders concerned, perform a review of emergency planning zones and emergency planning distances applying to...
Content type: Publications -
2015:37 Models for axial relocation of fragmented and pulverized fuel pellets in distending fuel rods and its effects on fuel rod heat load
Haverifall med kylmedelsförlust (LOCA) i lättvattenreaktorer kan leda till överhettning av bränslestavar, utvidgning av stavarnas kapslingsrör, samt axiell omflyttning av bränslekutsfragment i de delar av stavarna som expanderat. Bränsleomflyttningen kan koncentrera värmebelastningen till en begränsad del av stavarna och därigenom öka risken...
Content type: Publications -
2015:25 Design Guide for Nuclear Civil Structures (DNB)
The Swedish Radiation Safety Authority (SSM) and the Swedish licensees have previously in a jointly funded research project developed a design guide for civil structures at Swedish nuclear facilities to be based on Eurocodes, DNB. The report was published in January 2014 as SSM Report 2014:06. To further improve DNB and to ensure that the fundamentals of the recommendations will be applied...
Content type: Publications -
2012:61 Geochemical Constraints on Buffer Pore Water Evolution and Implications for Erosion
Mineralogical data from the Forsmark Site show that smectite and calcite occur at all depths in Forsmark fractures, with no evidence for removal/dissolution by previous glacial episodes. This natural analogue information implies that these minerals may not have been eroded/dissolved during previous glacial episodes. Available thermodynamic data suggest that repository-depth Forsmark...
Content type: Publications -
2005:60 Research and Service Experience with Environmentally-Assisted Cracking in Carbon and Low-Alloy Steels in High-Temperature Water
In this report, the most relevant aspects of research and service experience with environmentally assisted cracking of carbon and low-alloy steels in high-temperature water are reviewed, with special emphasis on the primary pressure-boundary components of boiling water reactors. The main factors controlling the susceptibility to environmentally assisted cracking under light water reactor...
Content type: Publications -
1995:19 Non-destructive Assay of Spent BWR Fuel with High-resolution Gamma-ray Spectroscopy
A method, based on high-resolution gamma-ray spectroscopy, has been developed for verification of burnup, cooling time, power history and, to some extent, the initial enrichment of spent BWR fuel. It is shown that, provided that the power history is known and corrected for, bumup and cooling time can be verified with accuracies within 3% and 60 days, respectively, for cooling times up to about...
Content type: Publications -
2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen
One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...
Content type: Publications -
2011:03 On Decommissioning Cost for Nuclear Power Plants
This research report summarizes what has changed over the latest 15 years concerning actual and estimated costs for the D&D of nuclear power plants that have been shut down permanently. It also reports on the availability of detailed information for actual nuclear power plant D&D cost breakdowns. The results will be one supporting document in the review of the estimates submitted for...
Content type: Publications -
2010:25 Modelling Coupled Processes in the Evolution of Repository Engineered Barrier Systems using QPAC-EBS
Currently in Sweden, the SR-Site safety assessment for a spent nuclear fuel repository is being developed by the Swedish Nuclear Fuel and Waste Management Company (SKB). The planned SSM review of this work requires access to a sufficient modelling capability to assess the combined performance of the engineered barriers (spent fuel canister, buffer and backfill) and the natural geosphere...
Content type: Publications -
2010:24 On Cost Estimate for Decommissioning of one Isotope Central
The present generation has the responsibility to ensure and guarantee that sufficient financial resources are accrued into the Swedish Nuclear Waste Fund to cover all future costs. Thus, the next generation, as well as any succeeding generations, will have the financial resources required in order to undertake the necessary measures, in an appropriate manner, for the decommissioning and...
Content type: Publications