Filtered generated 396 hits.
-
2012:37 Technical Note, Selective review of the hydrogeological aspects of SR-Site
This review of the hydrogeology is selective. It focuses on the measurement, interpretation and modelling of the potential repository host rock, that is the rock domain FFM01<-400m. It accepts as reasonably accurate the measurement and representation of the more transmissive parts of the hydrogeological system, particularly the near-surface 150m in the form presented by SKB. SKB have decided...
Content type: Publications -
2013:07 Corrosion of copper in distilled water without molecular oxygen and the detection of produced hydrogen
In this report, results are presented for copper which has been exposed to pure anoxic water in the temperature interval of 21 °C to 55 °C up to a total of 19 000 hours. Characterisations of copper surfaces after exposure have been performed ex-situ, meaning after termination of the experiment and exposing the specimen to normal atmospheric environment. Ideally characterisation of surfaces...
Content type: Publications -
2014:10 Technical Note, Rock Mechanics - Confidence of SKB’s models for predicting the occurrence of spalling – Main Review Phase
This review study is placed in the context of SSM’s Main Review Phase for SKB’s safety assessment SR-Site. The assignment is titled “Rock Mechanics – Confidence of SKB’s models for predicting the occurrence of spalling”. The report presents the authors’ assessment in response to the questions raised by SSM. The review concentrated on two main issues: (1) the analysis of the assumptions made...
Content type: Publications -
2014:29 Technical Note, Independent Modelling of Radionuclide Transport, Evaluation of Colloid Transport Modelling – Main Review Phase
SKB excludes consideration of colloids originating inside the canister in its performance assessment on the basis of the filtration capability of the buffer material. In the canister failure by corrosion scenario (central corrosion case), the buffer material is assumed eroded, and the filtration argument is not entirely valid for excluding modelling in-canister colloids. In this Technical...
Content type: Publications -
2014:24 Technical Note, Workshop on biosphere issues
The objective of this workshop was to bring together experts in the field of radionuclide transport in the biosphere including non-human biota and dose assessment to discuss the findings of the detailed reviews performed during the main review phase and to identify any further biosphere review issues. This report describes the outcome of the workshop organized by SSM on Biosphere Issues that...
Content type: Publications -
2017:20 Assessment of inertia effects on transient clad-to-coolant heat transfer and coolant flow under reactivity initiated accidents
In this report, simple hydrodynamic models are used for studying the effects of coolant inertia on fuel-to-coolant heat transfer and coolant flow under reactivity initiated accidents in light water reactors. The objective is to assess if the inertia effects are important enough to warrant modification of QT-COOL, a coolant channel module for two-phase flow that has recently been implemented as...
Content type: Publications -
1995:60 Reliability of Piping System Components -Volume 3: A Bibliography of Technical Papers and Reports Related to Piping Reliability
Reflecting on older analysis practices, passive components failures seldom receive explicit treatment in PSA. to expand the usefulness of PSA and to raise the realism in plant and system models the Swedish Nuclear power Inspectorate has undertaken a multi-year research project to establish a comprehensive passive components database, validate failure rate parameter estimates and model...
Content type: Publications -
2015:20 Guide for thyroid monitoring in the event of release of radioactive iodine in a nuclear emergency
This report aims to serve as a guide in the execution of a thyroid monitoring program during the intermediate phase of response to a nuclear emergency. Calibration factors for some instruments verified in the framework of the Nordic project THY- ROID (Nyander P. 2014) are listed here as an example. For different times after the intake, we present in this guide the measured values in net count...
Content type: Publications -
1997:12 Study of International Published Experiences in Joining Copper and Copper-alloys
This study has revealed a number of joining processes to be used when manufacturing copper-canisters for the final storage of high level nuclear waste. However, the decision on which material and which joining process to be used has to be based on the design criterions. The welding procedure has to be qualified i.e, it shall be demonstrated whether the procedure is capable of fulfilling...
Content type: Publications -
1999:13 Determination of the Neutron and Photon Dose Equivalent at Work Places in Nuclear Facilities of Sweden
Various mixed neutron-photon fields at workplaccs in the containment of pressurised water reactors and in the vicinity of transport containers with spent fuel elements were investigated with spectrometers and dosimeters.The spectral neutron fluences evaluated from measurements with multisphere systems were recommended to be used for the calculation of dosimetric reference values for...
Content type: Publications