Filtered generated 396 hits.
-
2008:16 Review of SKB:s Safety Assessment SR-Can: Contributions in Support of SKI:s and SSI:s Review by External Consultants
The work presented in this report is part of the Swedish Nuclear Power Inspectorate’s (SKI) and the Swedish Radiation Protection Authority’s (SSI) SR-Can review project. The Swedish Nuclear Fuel and Waste Management Co (SKB) plans to submit a license application for the construction of a repository for spent nuclear fuel in Sweden 2010. In support of this application SKB will present a safety...
Content type: Publications -
2007:09 DECOVALEX-THMC - Task C
This report describes the results of Task C1 of the international DECOVALEX– THMC project devoted to Excavation Damage Zone (EDZ) in argillaceous rock at the Tournemire site in France. Task C of the project is aimed to understand the physical phenomena induced by excavation in the argillaceous rock. The task is to develop adequate numerical models for interpretation of observed damaged zones...
Content type: Publications -
1997:05 SKI SITE-94
The Swedish Industry program for deep geological disposal of spent nuclear fuel and high-level radioactive waste is now in the early stages of the site selection process, with feasibility studies underway in 5 to 10 municipalities. According to the Swedish Nuclear Fuel and Waste Management Co., SKB (SKB RD&D Programme, 1995), the ongoing siting process involves selection of two sites for...
Content type: Publications -
2007:23 On Safety Management, A Frame of Reference for Studies of Safety Management with Examples From Non-Nuclear Contexts of Relevance for Nuclear Safety
The authors present the theoretical framework. There they also discuss the pros of using the system perspective to build a useful frame of reference of safety management using non- nuclear organizations; this as a way to create models useful for the nuclear power industry but based on general understanding of the concept of safety management. The chosen organizations are used extensively to...
Content type: Publications -
2015:11 Investigation of the Distribution of Phosphorus in Copper
Two copper alloys containing different amounts of phosphorus, 6 and 80 wtppm, respectively, have been investigated. The matrix of both alloys was analysed using atom probe tomography (APT). The matrix P concentration in the 80 wtppm P mate- rial was about the same as the bulk concentration and it was therefore concluded that the majority of the P atoms resides in the matrix. Grain boundaries...
Content type: Publications -
2014:20 An evaluation of high-temperature creep of zirconium alloys: data versus models
In this report Dr Massih presents correlations for creep in different phases of zirconium alloys and also presents a general solution to the difficulty of accurately describing the material properties in phase transition for several zirconium alloys. Based upon superplasticity relations, models are adapted to fit with experimental data for materials in transition regions. The creep models are...
Content type: Publications -
2015:43 Robust structural verification of pressurized nuclear components subjected to ratcheting
Background Pressurized components in nuclear applications that are subjected to cyclic loading may exhibit progressive deformation, so called structural ratcheting. If the component is made out of a material that are deformation hardening, it may also exhibit material ratcheting. The combined effects of structural- and material ratcheting are not taken into account in the methods and material...
Content type: Publications -
98:35 Nuclear Fuel Assembly Assessment Project and Image Categorization
C. S. Lindsey (1), T. Lindblad (1), K. Waldemark (1), L. Hildningsson (2). (1) Royal Institute of Technology, Stockholm, Sweden. (2) Swedish Nuclear Power Inspectorate, Stockholm, Sweden. July 1998 SKI English...
Content type: Publications -
2005:60 Research and Service Experience with Environmentally-Assisted Cracking in Carbon and Low-Alloy Steels in High-Temperature Water
In this report, the most relevant aspects of research and service experience with environmentally assisted cracking of carbon and low-alloy steels in high-temperature water are reviewed, with special emphasis on the primary pressure-boundary components of boiling water reactors. The main factors controlling the susceptibility to environmentally assisted cracking under light water reactor...
Content type: Publications -
2007:22 Safety Management An Introduction to a Frame of Reference Exemplified with Case Studies from Non-Nuclear Contexts
A systems perspective has been applied on safety management that will be the foundation for the frame of reference the authors intend to build during the three-year long project. The case studies are presented and form illustrations of both high quality safety management and weaknesses of the safety management and take a look at information feedback about the risks of the systems. An...
Content type: Publications