Filtered generated 213 hits.
-
2010:38 The feasibility of Backfilling a Repository of Spent Fuel: An Assessment of Recent Developments by SKB
In the Review Statement and Evaluation of SKB’s RD & D programme 2007 (SKI Report 2008:48E), the former Swedish Nuclear Power Inspectorate (SKI) commented that considerable work remained to be done for knowledge of both practical management issues on backfilling and analysis of long-term backfill evolution to reach the same level as for the canister and the buffer. SKI considered that the...
Content type: Publications -
2011:11 Handling Interfaces and Time-varying Properties in Radionuclide Transport Models
Quintessa’s QPAC code has been used to investigate the Qeq approach. The conclusions from this simulation study are the following. The basic approach to calculating Qeq values is sound, however, narrow channels could lead to the same release as larger fractures with the same pore velocity, so a channel enhancement factor of √10 should be considered. A spalling zone that increases the area of...
Content type: Publications -
2012:08 Deterministic Assessment of Future Costs for Dismantling (FA)
In this study a model for advanced deterministic cost calculation has been used to find a parametric value on the cost for dismantling of the FA-facility. The study gives good description of good practise to collect, test and utilise input data in a systematic way in order to make prudent cost estimates for any particular nuclear installation The Swedish Law stipulates that future expenses...
Content type: Publications -
2012:15 Technical Note, A review of the mechanical integrity of the canister
An introductory review of SR-Site has been conducted with respect to the mechanical integrity of the canister. The review is focused on the copper canister and the nodular cast iron insert. Review results show that a number of loads and loading scenarios for the copper canister has not been analysed by SKB. The importance of sufficient creep ductility of the copper material and sufficient...
Content type: Publications -
2017:18 FEM analysis of the mechanical integrity for the canister intended for storage of spent nuclear fuel with regard to copper creep ductility
Background For final storage of spent nuclear fuel it is suggested by the Swedish nuclear fuel and waste management company (SKB) to emplace the nuclear fuel into copper canisters which are surrounded by bentonite clay at approximately 500 meters’ depth into granitic rock. After emplacement of the canisters Bentonite swelling due to water saturation and hydrostatic pressure build up the...
Content type: Publications -
2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C
Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile stresses are present as well as a material were SCC can occur, SCC could potentially be a problem for the...
Content type: Publications -
2017:28 SSM’s external experts’ review of SKB’s safety assessment SR-PSU - hydrogeology, geochemistry and bentonite
Background The Swedish Radiation Safety Authority (SSM) received an application for the expansion of SKB's final repository for low and intermediate level waste at Forsmark (SFR) on the 19 December 2014. SSM is tasked with the review of the application and will issue a statement to the government who will decide on the matter. An important part of the application is SKB's assessment of...
Content type: Publications -
2013:27 Numerical simulations of headed anchors break in reinforced and non-reinforced concrete structures
The design codes for anchorage of equipment in concrete structures have been developed since the time the Swedish power plants were designed. Furthermore, the design basis has been updated and in some cases new mechanical loads have been added. As a consequence, it can be difficult for some anchorages to meet the requirements of today. In the design of anchorage equipment the beneficial effect...
Content type: Publications -
2012:03 The IAEA Integrated Regulatory Review Service Mission to Sweden in February 2012
The Swedish Government decided on January 22, 2009 to mandate the Swedish Radiation Safety Authority, SSM, to apply for an international review of the Author-ity and its areas of supervision, an ‘IRRS’ (Integrated Regulatory Review Service) carried out by the International Atomic Energy Agency (IAEA). On February 25, 2009, SSM made a formal request to the IAEA for an IRRS in Sweden. The time...
Content type: Publications -
2024:02 Earthquake stationarity and distributed fault displacements, Forsmark repository site
SSM perspective Background and objective Large earthquakes occur predominantly along plate boundaries. Due to this, much of the research have been directed towards this tectonic setting. Also, the general lack of seismicity data in stable continental interiors, such as the Baltic Shield, have impeded estimations, as well as the understanding, of the seismic hazard in these tectonic settings.
Content type: Publications