Filtered generated 211 hits.
-
2012:03 The IAEA Integrated Regulatory Review Service Mission to Sweden in February 2012
The Swedish Government decided on January 22, 2009 to mandate the Swedish Radiation Safety Authority, SSM, to apply for an international review of the Author-ity and its areas of supervision, an ‘IRRS’ (Integrated Regulatory Review Service) carried out by the International Atomic Energy Agency (IAEA). On February 25, 2009, SSM made a formal request to the IAEA for an IRRS in Sweden. The time...
Content type: Publications -
2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C
Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile stresses are present as well as a material were SCC can occur, SCC could potentially be a problem for the...
Content type: Publications -
2009:01 Decommissioning of the Nuclear Reactors R2 and R2-0 at Studsvik, Sweden – General Data as called for under Article 37 of the Euratom Treaty
The report describes the plans for decommissioning of the nuclear research and material test reactors R2 and R2-0, situated at the Studsvik site in Sweden. The purpose of the document is to serve as information for the European Commission, and to fulfil the requirements of Article 37 of the Euratom Treaty. According to Article 37, each Member State shall provide the Commission with such...
Content type: Publications -
2007:02e Radiation Environment in Sweden, summary
The radiation environment to which the population of Sweden is exposed is dominated by medical investigations and background radiation from the ground and building materials in our houses. That is the conclusion of the first general Swedish summary of environmental monitoring data and dose calculations within the field of radiation. The report shows that people’s behaviour in the form of...
Content type: Publications -
2017:18 FEM analysis of the mechanical integrity for the canister intended for storage of spent nuclear fuel with regard to copper creep ductility
Background For final storage of spent nuclear fuel it is suggested by the Swedish nuclear fuel and waste management company (SKB) to emplace the nuclear fuel into copper canisters which are surrounded by bentonite clay at approximately 500 meters’ depth into granitic rock. After emplacement of the canisters Bentonite swelling due to water saturation and hydrostatic pressure build up the...
Content type: Publications -
2016:16 Technical Note, Possible influence from stray currents from high voltage DC power transmission on copper canisters
Main Review Phase Introduction As part of the Swedish Radiation Safety Authority’s (SSM) review of the Swedish Nuclear Fuel and Waste management company (SKB) license application for a final storage for spent nuclear fuel, SSM has asked for complementary information regarding the effect of stray currents from high voltage cables on copper corrosion (SSM 2012). SKB therefore has performed an...
Content type: Publications -
2015:52 Technical Note, Review of SKB’s creep model, its implementation into ABAQUS and an evaluation of SKB’s analyses of theevaluation of SKB’s analyses of the copper canister
Peter Segle SSM English...
Content type: Publications -
2014:54 Technical Note, Further Modelling Comparison of Simple Reference Biosphere Models with the LDF Modelling Approach – Main Review Phase
This Technical Note describes further use of simple reference biosphere models for SSM’s review of the Landscape Dose Factor (LDF) approach adopted by SKB in the SR‑Site safety assessment for the proposed final disposal of spent nuclear fuel at the Forsmark site. Simple biosphere models for the Forsmark site under temperate climate conditions were previously developed for SSM’s review and are...
Content type: Publications -
2014:47 Technical Note, Assessment of groundwater salinity evolution at repository depth and especially the impact of dilute water infiltration
Groundwater compositions entering deposition holes in the repository will be progressively diluted over time because of expected changes of topographic and climatic conditions at Forsmark. This is a long-term safety issue because very dilute water could destabilise compacted bentonite and erode buffer, leading to advective movement of sulphide-containing water to the canister surface. SKB’s...
Content type: Publications -
2014:40 Technical Note, Review of Performance Confirmation Programs and Potential Roles in SSM’s Current Review of SKB’s License Application – Main Review Phase
The initial license application of a repository concept for disposal of radioactive waste is based on extensive site characterization, baseline monitoring, development of disposal designs and engineered barriers, test data on engineered barriers, and the integration of a series of models representing processes controlling the containment, release and migration of radionuclides from the...
Content type: Publications