Filtered generated 233 hits.
-
1990:18 Some Estimates of the Total NuclideInventory in the Year 2100 from Swedish Nuclear Power Production
The total nuclide inventory in spent fuel from the swedish nuclear power programme has been estimated for three cases. All reactors were arrumed to operate until the year 2010 and then shut down simultaneously. All fuel used was assumed to be based on enriched natural uranium. The reactors were assumed to shut down after 25 years of commercial operation, but not later than in the year 2010.
Content type: Publications -
2013:24 Modelling of nuclear fuel cladding under loss-of-coolant accident conditions
We present a unified model for calculation of zirconium alloy fuel cladding rupture during a postulated loss-of-coolant accident in light water reactors. The model treats the Zr alloy solid-to-solid phase transformation kinetics, cladding creep deformation, oxidation and rupture as a function of temperature and time in an integrated fashion during the transient. The fuel cladding material...
Content type: Publications -
2014:20 An evaluation of high-temperature creep of zirconium alloys: data versus models
In this report Dr Massih presents correlations for creep in different phases of zirconium alloys and also presents a general solution to the difficulty of accurately describing the material properties in phase transition for several zirconium alloys. Based upon superplasticity relations, models are adapted to fit with experimental data for materials in transition regions. The creep models are...
Content type: Publications -
2013:14 Approaches used for Clearance of Lands from Nuclear Facilities among Several Countries – Evaluation for Regulatory Input
SSM has recently established new regulations for clearance of materials, rooms, buildings and land (SSMFS 2011:2). The regulations specify that license holders for practices involving ionising radiation shall take measures after the cessation of the practice to achieve clearance of rooms, buildings and land. The regulations state nuclide specific clearance levels in becquerel per m2 for rooms...
Content type: Publications -
2009:29e Swedish national plan for the management of all radioactive waste
The Swedish Radiation Safety Authority has been assigned by the government to develop a national plan for the management of all radioactive waste. This report was presented to the government 30 June 2009. The report has been developed in coordination with representatives from other authorities, trade and industry organizations, operators and other parties interested, forming a joint action...
Content type: Publications -
1994:08 The content and environmentalimpact from the waste depositoryin Sillamae
The studies of the waste depository in Sillamae, Estonia, shows that the content as well as the wall material is typical tailings from chemical enrichment of uranium ore. The environmental impact from radioactive substances as well as heavy metals has been estimated. Results show the major radiological impact to the population in the Sillamae town is the exposure to radon and its daughter...
Content type: Publications -
Pronouncement on repository applications made to the Swedish Government
On 23 January 2018, the Swedish Radiation Safety Authority, SSM, in its capacity as a preparatory authority, submitted its pronouncement to the Government regarding SKB's licence applications for final disposal of spent nuclear fuel. SSM recommends approval of SKB's applications under the Act on Nuclear Activities for licences to construct a repository for spent nuclear fuel, located at...
Content type: Regular Pages -
2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C
Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile stresses are present as well as a material were SCC can occur, SCC could potentially be a problem for the...
Content type: Publications -
2017:18 FEM analysis of the mechanical integrity for the canister intended for storage of spent nuclear fuel with regard to copper creep ductility
Background For final storage of spent nuclear fuel it is suggested by the Swedish nuclear fuel and waste management company (SKB) to emplace the nuclear fuel into copper canisters which are surrounded by bentonite clay at approximately 500 meters’ depth into granitic rock. After emplacement of the canisters Bentonite swelling due to water saturation and hydrostatic pressure build up the...
Content type: Publications -
2016:16 Technical Note, Possible influence from stray currents from high voltage DC power transmission on copper canisters
Main Review Phase Introduction As part of the Swedish Radiation Safety Authority’s (SSM) review of the Swedish Nuclear Fuel and Waste management company (SKB) license application for a final storage for spent nuclear fuel, SSM has asked for complementary information regarding the effect of stray currents from high voltage cables on copper corrosion (SSM 2012). SKB therefore has performed an...
Content type: Publications