Filtered generated 146 hits.
-
2017:18 FEM analysis of the mechanical integrity for the canister intended for storage of spent nuclear fuel with regard to copper creep ductility
Background For final storage of spent nuclear fuel it is suggested by the Swedish nuclear fuel and waste management company (SKB) to emplace the nuclear fuel into copper canisters which are surrounded by bentonite clay at approximately 500 meters’ depth into granitic rock. After emplacement of the canisters Bentonite swelling due to water saturation and hydrostatic pressure build up the...
Content type: Publications -
2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C
Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile stresses are present as well as a material were SCC can occur, SCC could potentially be a problem for the...
Content type: Publications -
2012:39 Technical Note, Review of Engineering Geology and Rock Engineering aspects of the construction of a KBS-3 repository at the Forsmark site – Initial Review Phase
In general, the reviewers find that the level of geomechanics data collected and synthesized to date has been impressive in scope and high in quality. The data collected has been incorporated into interlinked analyses concerning construction and operational performance of the repository. There are a number of uncertainties in the data and subsequent analyses that are unavoidable when dealing...
Content type: Publications -
2012:44 Technical Note, Review of Matrix Diffusion and related properties of intact rock in SKB’s Licence Application for a Spent Nuclear Fuel Repository in Forsmark, Sweden
This report summarizes a review of SKB’s theoretical development of matrix diffusion, its associated processes and parameters, and the data supporting calculations of matrix diffusion. In addition to diffusion, this review covers matrix porosity, the formation factor, matrix diffusivity, penetration depth, and measurement of some of these parameters with electrical methods. Sorption and the...
Content type: Publications -
2017:28 SSM’s external experts’ review of SKB’s safety assessment SR-PSU - hydrogeology, geochemistry and bentonite
Background The Swedish Radiation Safety Authority (SSM) received an application for the expansion of SKB's final repository for low and intermediate level waste at Forsmark (SFR) on the 19 December 2014. SSM is tasked with the review of the application and will issue a statement to the government who will decide on the matter. An important part of the application is SKB's assessment of...
Content type: Publications -
2012:41 Technical Note, Hydrogeological conditions at the Forsmark site
The hydrogeological site description and groundwater models employed in support of SR-Site, in many ways, represent advances in the state of the art for crystalline bedrock where groundwater moves mainly through fractures. Advanced methods are used for representing water-conducting natural features on scales from kilometres down to a meter, as well as excavated portions of the repository...
Content type: Publications -
2012:38 Technical Note, Radiological effects on non-human biota - initial review
The focus of this review was SKB’s assessment of radiological effects on non-human biota in SR-Site according to present regulations and guidance from SSM and it was conducted by Karolina Stark at the Department of Systems Ecology, Stockholm University. In short, the results from this review show that the completeness of the safety assessment can be questioned regarding considered...
Content type: Publications -
2019:24 SSM's external experts' review of SKB's analysis of long-term safety of 1BMA (SFR)
SSM perspective Background Fractures in the concrete barrier of the rock vault 1BMA in the final repository for low and intermediate level waste (SFR) have been observed. The Swedish Radiation Safety Authority (SSM) enforced Swedish Nuclear Fuel and Waste Management Company (SKB) to assess the long-term radiological consequences of 1BMA (SSM2015-2432-26) given the present state of the rock...
Content type: Publications -
2012:18 Technical Note, SR-Site Independent Modelling of Engineered Barrier Evolution and Coupled THMC: Contribution to the Initial Review Phase
This review has focussed mainly on the modelling of the Engineered Barrier System (EBS) evolution, which includes coupled thermal, hydraulic, mechanical and chemical (THMC) processes. Additionally, the role of the EBS in the wider safety case was reviewed, including its treatment in scenarios and its representation in conceptual models since this provided the motivation for the modelling work...
Content type: Publications -
2012:11 Issues in the corrosion of copper in a Swedish high level nuclear waste repository
The objective with this research project was to increase knowledge in the area of copper corrosion in the planned repository environment and obtain information on how copper corrosion evolves during the assessment period of 100 000 years. The equilibrium chemical composition of groundwater close to the canister as a function of temperature has been calculated by use of a thermodynamics code...
Content type: Publications