Filtered generated 759 hits.
-
2018:22e ESS research facility Basis for emergency preparedness and response planning
Further information Summary Northeast of Lund, Sweden, in the area of Brunnshög, is the site of European Spallation Source ERIC (ESS), a research facility that is under construction. When the facility (hereinafter frequently referred to as “ESS”) is commissioned, a linear accelerator will supply protons to a rotating target of tungsten, whereupon neutrons are generated through...
Content type: Publications -
2018:17 Assessment of structures subject to concrete pathologies (ASCET), phase 2
Background ASCET is an international research project initiated by WGIAGE1 OECD2 / NEA3. WGIAGE4 Concrete subgroup is a working group within the OECD / NEA whose task is to address issues concerning the maintenance of the integrity of concrete structures, proposals for general principles to optimally handle the challenges of integrity, especially with regard to aging of concrete structures.
Content type: Publications -
2018:18 Procedure for Safety Assessment of Components with Defects
Background SSM and the Swedish nuclear power plant owners have financed Kiwa Inspecta Technology in Sweden to develop a new version of the handbook for assessment of defects. This represents a major update of the former fracture mechanics handbook that was published at SSM as Research 2008:01. The procedure in the handbook is based on the British R6-method where the failure mechanisms...
Content type: Publications -
2018:24 Structural equation modelling for analysis of human and organizational factors in nuclear power plant control rooms
SSM perspective Background During the supervisory work of the Swedish Radiation Safety Authority (SSM), a need was identified to develop the methods used when evaluating control room work in the central control rooms of nuclear power plants. Benchmarking is commonly used today, with reference values from earlier Integrated System Validation (ISV), when ISV is available. Often, ISV performs...
Content type: Publications -
2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C
Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile stresses are present as well as a material were SCC can occur, SCC could potentially be a problem for the...
Content type: Publications -
2017:18 FEM analysis of the mechanical integrity for the canister intended for storage of spent nuclear fuel with regard to copper creep ductility
Background For final storage of spent nuclear fuel it is suggested by the Swedish nuclear fuel and waste management company (SKB) to emplace the nuclear fuel into copper canisters which are surrounded by bentonite clay at approximately 500 meters’ depth into granitic rock. After emplacement of the canisters Bentonite swelling due to water saturation and hydrostatic pressure build up the...
Content type: Publications -
2017:28 SSM’s external experts’ review of SKB’s safety assessment SR-PSU - hydrogeology, geochemistry and bentonite
Background The Swedish Radiation Safety Authority (SSM) received an application for the expansion of SKB's final repository for low and intermediate level waste at Forsmark (SFR) on the 19 December 2014. SSM is tasked with the review of the application and will issue a statement to the government who will decide on the matter. An important part of the application is SKB's assessment of...
Content type: Publications -
2019:12 Radiological risk assessment for the “Radon” type surface disposal facility in Chisinau, Moldova
Abstract The long-term conditions and potential radiological consequences of the legacy radioactive waste stored in the RADON-type disposal facility outside Chisinau is of concern for the central government authorities of the Republic of Moldova. A radiological risk assessment of “zero alternative scenario” for the RADON-type of near-surface disposal facility has been conducted. The objective...
Content type: Publications -
2019:15 3D Thermo-Mechanical Coupled Modelling of Thermo-Seismic Response of a Fractured Rock Mass related to the Final Disposal of Spent Nuclear Fuel and Nuclear Waste in Hard Rock
SSM perspective Background When assessing the long-term safety of a repository for spent nuclear fuel it is important to consider future earthquakes. Previous studies by Yoon et al. (2014, SSM Report 2014:59) and (2016, SSM Report 2016:23) investigated the fracture responses due to heat and earthquakes at major deformation zones using a 2D thermo-mechanical coupled model that uses a Particle...
Content type: Publications -
2019:24 SSM's external experts' review of SKB's analysis of long-term safety of 1BMA (SFR)
SSM perspective Background Fractures in the concrete barrier of the rock vault 1BMA in the final repository for low and intermediate level waste (SFR) have been observed. The Swedish Radiation Safety Authority (SSM) enforced Swedish Nuclear Fuel and Waste Management Company (SKB) to assess the long-term radiological consequences of 1BMA (SSM2015-2432-26) given the present state of the rock...
Content type: Publications