Filtered generated 70 hits.
-
2013:01 Validation of Weld Residual Stress Modeling in the NRC International Round Robin Study
Weld residual stresses (WRS) have a large influence on the behavior of cracks growing under normal operation loads and on the leakage flow from a through-wall crack. Accurate prediction on weld residual stresses is important to make proper decisions when cracks in weld joints are detected. During the latest years, there has been a strong development in both analytical procedures to...
Content type: Publications -
2013:04 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 18
The program executed in Stage 18 consists of the following three parts: Application of CoreSim with a two-dimensional model of vibrating fuel assemblies, for the calculation of ex-core detector noise throughout a fuel cycle; An investigation of the neutron noise, induced by propagating perturbations, in various thermal and fast reactor systems, in two-group theory; A consistent derivation of...
Content type: Publications -
2013:13 Review of Dismantling Costs - Nuclear Installations
In this study three reviews of cost assessments for some smaller nuclear installations are presented for which nuclear waste liabilities shall be accrued according to the Financing Act (Lag (2006:647) om finasiella åtgärder för hanteringen av restprodukter från kärnteknisk verksamhet). It is expected that these reviews will contribute to develop premium quality assessments...
Content type: Publications -
2013:36 Technical Note, Review and assessment of aspects of the Qeq concept – Main Review Phase
This technical review assignment considers the models and abstractions that Swedish Nuclear Fuel and Waste Management Company (SKB) developed to represent transport of dissolved constituents in the near field at the Forsmark site, in particular the Qeq abstraction for diffusive transport. SKB uses the Qeq parameter to scale concentration gradients in order to estimate dissolved-species fluxes...
Content type: Publications -
2013:35 Technical Note, Rock Mechanics – Confidence of SKB’s models for predicting the occurrence of a damage zone around the excavations – Main Review Phase
This assignment, performed at Southwest Research Institute, focusses on evaluating SKB’s assessment of potential occurrence of damaged rock zones (also referred to as excavation-damaged zone or EDZ) around underground excavations at the site. This report presents the authors’ evaluation of SKB’s assessment in the specific area based on questions raised by SSM. The evaluation includes...
Content type: Publications -
2013:16 Technical Note, Assessment of PWR fuel depletion and of neutron multiplication factors for intact PWR fuel copper canisters – main review phase
SKB (Svensk Kärnbränslehantering AB) in 2011 applied to the Swedish government for approval of a proposed solution for disposal of used fuel from Swedish nuclear power reactors and some relatively minor quantities of other fissile material. This Technical Note contains results of a recent review of the SKB methods used to determine the influence of reactor depletion on keff of intact...
Content type: Publications -
2013:33 Technical Note, Seismology – Frequencies and mechanisms. -Initial review phase
The Swedish Radiation Safety Authority (SSM) reviews the Swedish Nuclear Fuel Company’s (SKB) applications under the Act on Nuclear Activities (SFS 1984:3) for the construction and operation of a repository for spent nuclear fuel and for an encapsulation facility. As part of the review, SSM commissions consultants to carry out work in order to obtain information on specific issues. The...
Content type: Publications -
2013:14 Approaches used for Clearance of Lands from Nuclear Facilities among Several Countries – Evaluation for Regulatory Input
SSM has recently established new regulations for clearance of materials, rooms, buildings and land (SSMFS 2011:2). The regulations specify that license holders for practices involving ionising radiation shall take measures after the cessation of the practice to achieve clearance of rooms, buildings and land. The regulations state nuclide specific clearance levels in becquerel per m2 for rooms...
Content type: Publications -
2013:30 Laser pointers and Eye injuries - An analysis of reported cases
The safety limits that exist for human exposure of laser radiation are essential to reduce the risk of injuries. These values, however, give very little information on what tissue damages that may be expected at various elevated exposure levels. Similarly, the Swedish Radiation Protection Authority (SSM) has very little information on how such tissue damage is related to the impairment of the...
Content type: Publications -
2013:31 Aesthetic ultrasound devices – current state of knowledge and suggested measurement set-up for characterization of exposure
This report concerns the ultrasound devices used for the aesthetic purposes of body contouring and fat reduction (ablation of adipose tissue). Such devices have recently become more frequent on the Swedish market. These ultrasound devices are currently not medically regulated in Sweden and little is known about their safety and potentially harmful exposure when using them. This report aims to...
Content type: Publications