Filtered generated 21 hits.
-
2017:13 Monte Carlo patient-specific pre-treatment QA system for volumetric modulated arc therapy
Background The clinical use of volumetric modulated arc therapy (VMAT) has augmented rapidly since it became commercially available. As a result, the need for comprehensive quality assurance (QA) has increased. Current practices in Sweden normally compare the delivered dose with the planned dose based on measurements with different methods, for instance: portal dosimetry, point dose...
Content type: Publications -
2014:28 Numerical simulation of ductile crack growth in residual stress fields
The study has shown on the capability of the cell model in capturing the effects on ductile tearing from limited pre-load levels and a residual stress field. Some of the conclusions are as follows: No distinctive influence on the material fracture toughness is observed from pre-loading (work hardening), both tensile and compressive, at room temperature of 1.5 or 3 % total strain. The cell...
Content type: Publications -
2017:29 Evaluation of the simulation software CIVA for qualification purpose
Background Modeling is an important tool within NDT, partly to develop and optimize testing technologies, but also within the Qualification Body’s activities to assess technical verifications and perform parameter studies. SSM has supported university research in the area for many years and, among other things, in the development of a software for ultrasound modeling. In addition, the...
Content type: Publications -
2017:16 Stress intensity factor solutions for circumferential cracks in cylindrical bars under axisymmetric loading and global bending
Background The case of a circumferential crack in a cylindrical bar has not been available in the ProSACC code. The need for such a geometry, especially considering nonlinear axisymmetric loading and global bending, has motivated the development of new stress intensity factor solutions, also known as K-solutions. These new K-solutions will be available in ISAAC, the successor to ProSACC.
Content type: Publications -
1992:3 Characterization of seismic ground motions for probabilistic safety analyses of nuclear facilities in Sweden. SUMMARY REPORT
In Scandinavia seismic activity is generally low. Only a few incidents have been registered in historic time, which might have damaged an industrial plant of today. The risk of a nuclear accident in Sweden, caused by an earthquake, may thus be considered to be low. The two latest reactors Forsmark 3 and Oskarshamn 3 have been analysed and designed to resist a specified earthquake. For the...
Content type: Publications -
2017:19 Numerical simulations of headed anchors break in reinforced and non-reinforced concrete structures, Phase 2
Background In the design of anchorage equipment in concrete structures the beneficial effects of reinforcement are, in most cases, not considered. The American ASCI 349-06 code opens up for a more detailed analysis where the beneficial impact of reinforcement on anchor capacity can be taken into account. How this analysis can be done is, however, not explicitly described in the code. The...
Content type: Publications -
2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C
Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile stresses are present as well as a material were SCC can occur, SCC could potentially be a problem for the...
Content type: Publications -
2017:18 FEM analysis of the mechanical integrity for the canister intended for storage of spent nuclear fuel with regard to copper creep ductility
Background For final storage of spent nuclear fuel it is suggested by the Swedish nuclear fuel and waste management company (SKB) to emplace the nuclear fuel into copper canisters which are surrounded by bentonite clay at approximately 500 meters’ depth into granitic rock. After emplacement of the canisters Bentonite swelling due to water saturation and hydrostatic pressure build up the...
Content type: Publications -
2007:21 On tentative decommissioning cost analysis with specific authentic cost calculations with the application of the Omega code on a case linked to the Intermediate storage facility for spent fuel in Sweden
Marek Vasko, Vladimir Daniska, Frantisek Ondra, Peter Bezak, Kristina Kristofova, Peter Tatransky, Matej Zachar, Staffan Lindskog SKI English...
Content type: Publications -
2017:25 Evaluation of weld fatigue reduction in austenitic stainless steel pipe components
Background The performed investigation is a continuation of the work performed in SSM 2015:38 where fatigue tests were performed on pressurized welded austenitic stainless steel piping components. The specimens were subjected to a realistic variable amplitude loading with mainly reversed bending deformation and particular focus on high cycle fatigue. The previous fatigue results were quite...
Content type: Publications