Filtered generated 291 hits.
-
2007:14 Review of experimental data for modelling LWR fuel cladding behaviour under loss of coolant accident conditions
This project has contributed to the research goal of giving a basis for SKIs supervision by means of evaluating experimental data and modelling the nuclear fuel cladding during a design base accident. The project has also contributed to the research goal to develop the competence about licensing of fuel at high burnup, which is an important safety issue. The results are useful as such, but...
Content type: Publications -
2017:18 FEM analysis of the mechanical integrity for the canister intended for storage of spent nuclear fuel with regard to copper creep ductility
Background For final storage of spent nuclear fuel it is suggested by the Swedish nuclear fuel and waste management company (SKB) to emplace the nuclear fuel into copper canisters which are surrounded by bentonite clay at approximately 500 meters’ depth into granitic rock. After emplacement of the canisters Bentonite swelling due to water saturation and hydrostatic pressure build up the...
Content type: Publications -
2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C
Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile stresses are present as well as a material were SCC can occur, SCC could potentially be a problem for the...
Content type: Publications -
2008:06 Synthetic Aperture Focusing Technique in Ultrasonic Inspection of Coarse Grained Materials
Experience from the ultrasonic inspection of nuclear power plants has shown that large focused transducers are relatively effective in suppressing grain (structure) noise. Operation of a large focused transducer can be thought of as an integration (coherent summation) of individual beams reflected from the target and received by individual points at the transducer surface. Synthetic aperture...
Content type: Publications -
2007:06 Probabilistic Safety Goals - Phase 1 -Status and Experiences in Sweden and Finland
Based on a series of interviews and on literature reviews as well as on a limited interna- tional over-view, the project has described the history and current status of safety goals in Sweden and Finland. A number of issues were discussed more in detail, including the status of the safety goals in view of the fact that they are often exceeded, strategies for handling violations of safety...
Content type: Publications -
2007:02e Radiation Environment in Sweden, summary
The radiation environment to which the population of Sweden is exposed is dominated by medical investigations and background radiation from the ground and building materials in our houses. That is the conclusion of the first general Swedish summary of environmental monitoring data and dose calculations within the field of radiation. The report shows that people’s behaviour in the form of...
Content type: Publications -
2016:11 Leadership in safety critical industries: Project Report 1
This report is the first of two prepared on behalf of the Swedish Radiation Safety Authority (Strålsäkerhetsmyndigheten, SSM) for a project entitled ‘Leadership in safety critical industries’. This first report is a literature review of the topic of Safety Leadership, which is seen as a key component and driver of safety culture. SSM English This report is the first of two prepared on...
Content type: Publications -
96:40 Status and Use of PSA in Sweden
The performance and use of PSA:s in Sweden goes back about two decades. During all of this time, the field of PSA has been developing intensively, both internationally and within Sweden. The latest years have been characterised by an increased use of PSA models and results, and by major extensions of existing PSA models. The aim of this document is to describe PSA in Sweden with respect to...
Content type: Publications -
1993:11 Methods for determination of strontium -90 in food and environmental samples by Cerenkov counting
The procedure for determination of strontuim-90 (=yttrium-90) by HDEHPextraction of yttrium-90 and counting the Cerenkov radiation in a liquid scintillation counter, is applicable for all kind of samples. Prior to analyses liquid samples are evaporated to dryness and ashed. Environmental and food samples are oven dried and ashed. The ash is dissolved in 1 molar hydrochloric acid and, at pH...
Content type: Publications -
2010:17 Quality Assurance Review of SKB’s Copper Corrosion Experiments
SKB is preparing a license application for the construction of a final repository for spent nuclear fuel in Sweden. This application will be supported by the safety assessment SR-Site for the post-closure phase. The assessment of long-term safety is based on a broad range of experimental results from laboratory scale, intermediate scale and up to full scale experiments. It is essential that...
Content type: Publications