Filtered generated 296 hits.
-
2018:22e ESS research facility Basis for emergency preparedness and response planning
Further information Summary Northeast of Lund, Sweden, in the area of Brunnshög, is the site of European Spallation Source ERIC (ESS), a research facility that is under construction. When the facility (hereinafter frequently referred to as “ESS”) is commissioned, a linear accelerator will supply protons to a rotating target of tungsten, whereupon neutrons are generated through...
Content type: Publications -
2018:08 Calculated radiological consequences of applying European clearance levels to scrap metal from the decommissioning of Swedish nuclear facilities
Background Many practices involving radioactive substances generate materials with potential or known radioactive contamination. Clearance of materials means a decision that such materials can be released from regulatory control and used or disposed of without restrictions from a radiation protection point of view. According to regulations issued by the SSM, such decisions must be based on...
Content type: Publications -
2018:17 Assessment of structures subject to concrete pathologies (ASCET), phase 2
Background ASCET is an international research project initiated by WGIAGE1 OECD2 / NEA3. WGIAGE4 Concrete subgroup is a working group within the OECD / NEA whose task is to address issues concerning the maintenance of the integrity of concrete structures, proposals for general principles to optimally handle the challenges of integrity, especially with regard to aging of concrete structures.
Content type: Publications -
2019:15 3D Thermo-Mechanical Coupled Modelling of Thermo-Seismic Response of a Fractured Rock Mass related to the Final Disposal of Spent Nuclear Fuel and Nuclear Waste in Hard Rock
SSM perspective Background When assessing the long-term safety of a repository for spent nuclear fuel it is important to consider future earthquakes. Previous studies by Yoon et al. (2014, SSM Report 2014:59) and (2016, SSM Report 2016:23) investigated the fracture responses due to heat and earthquakes at major deformation zones using a 2D thermo-mechanical coupled model that uses a Particle...
Content type: Publications -
2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C
Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile stresses are present as well as a material were SCC can occur, SCC could potentially be a problem for the...
Content type: Publications -
2019:23 Participation in the European Committee for Standardization's workshop regarding civil structures
SSM perspective Background During the period 2014-2018, a CEN1 workshop (Phase 2 Prospective Group 3 civil works) have been carried out. The aim of the workshop is to provide a base founded on the French standard in order to be able to establish a possible future European standard for the design of civil structures at nuclear power plants. The workshop has identied which additional...
Content type: Publications -
2019:20 Assessment of structures subject to concrete pathologies (ASCET), phase 3
SSM perspective Background ASCET is an international research project initiated by WGIAGE1 OECD2 / NEA3. WGIAGE Concrete subgroup is a working group within the OECD / NEA whose task is to address issues concerning the maintenance of the integrity of concrete structures, proposals for general principles to optimally handle the challenges of integrity, especially with regard to ageing of...
Content type: Publications -
2011:26 The influence of temperature and fluid pressure on the fracture network evolution around deposition holes of a KBS-3V concept at Forsmark, Sweden
In preparation for the review of SKB’s license application for disposal of spent nuclear fuel, SSM is conducting studies to evaluate the performance of the multi-barrier principle on which the KBS-3 concept is based. Copper canisters containing the spent nuclear fuel are placed into granitic bedrock at about 500 m depth and embedded in clay. Thus, the rock, the clay and the copper canister...
Content type: Publications -
2012:11 Issues in the corrosion of copper in a Swedish high level nuclear waste repository
The objective with this research project was to increase knowledge in the area of copper corrosion in the planned repository environment and obtain information on how copper corrosion evolves during the assessment period of 100 000 years. The equilibrium chemical composition of groundwater close to the canister as a function of temperature has been calculated by use of a thermodynamics code...
Content type: Publications -
2011:12 Analysis of Barrier Performance: Modelling of Copper corrosion scenarios with and without buffer erosion
The purpose of this project was to develop a numerical modelling capacity to address the corrosion of the copper canister under gradually changing transport conditions caused by buffer erosion and removal of buffer mass. Due to the complexity of this task, such a model cannot be realistic in all respects, but the present effort should address the feasibility of solving numerical and...
Content type: Publications