Filtered generated 291 hits.
-
2009:16 Influence of Hardening Model on Weld Residual Stress Distribution
Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to arrive at proper conclusions when assessing detected flaws, for inspection planning and for assessment of leak-before-break margins. Therefore, it is very important to have...
Content type: Publications -
SSM Report 2008:01 A combined deterministic and probabilistic procedure for safety assessment of components with cracks – Handbook
SSM has supported research work for the further development of a previously developed procedure/handbook (SKI Report 99:49) for assessment of detected cracks and tolerance for defect analysis. During the operative use of the handbook it was identified needs to update the deterministic part of the procedure and to introduce a new probabilistic flaw evaluation procedure. Another identified need...
Content type: Publications -
2009:12 Evaluating safety-critical organizations – emphasis on the nuclear industry
The regulator identified a few years ago a need for a better understanding of and a deeper knowledge on methods for evaluating safety critical organisations. There is a need for solid assessment methods in the process of management of organisational changes as well as in continuously performed assessment of organisations such as nuclear power plants. A considerable body of literature exists...
Content type: Publications -
2018:01 Monte Carlo patient-specific pre-treatment QA system for volumetric modulated arc therapy
Background According to the Swedish Radiation Safety Authority's Regulations in Radiotherapy (SSMFS 2008:33) are Swedish clinics required to verify the individual dose to patients, prior the first time a new treatment is given. To fulfil this requirement, current clinics perform in-vivo dosimetry in three dimensional conformal radiation therapy (3DCRT), which means that the entrance of...
Content type: Publications -
1985:26 Light Resin Curing Devices -A Hazard Evaluation
This report has been worked out in an effort to give answers to some of the questions concerning curing devices used in the odontology. Recently such questions have frequently been submitted to the Institute of Radiation Protection and have mainly dealt with hazards from an ergophthalmologic point of view. Overexposure to visible radiation may result in thermal damages in the retina, which...
Content type: Publications -
2015:25 Design Guide for Nuclear Civil Structures (DNB)
The Swedish Radiation Safety Authority (SSM) and the Swedish licensees have previously in a jointly funded research project developed a design guide for civil structures at Swedish nuclear facilities to be based on Eurocodes, DNB. The report was published in January 2014 as SSM Report 2014:06. To further improve DNB and to ensure that the fundamentals of the recommendations will be applied...
Content type: Publications -
2013:28 Brine intrusion by upconing for a high-level nuclear waste repository at Forsmark. Scoping calculations
SSM currently reviews a license application for a spent nuclear fuel repository that is proposed to be located at Forsmark, Sweden. The repository is to be situated at 500 m depth in the rock and copper canisters are deposited in holes excavated from the tunnel system. To protect the canisters they are surrounded by a bentonite clay buffer, which is to swell when getting in contact with...
Content type: Publications -
2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen
One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...
Content type: Publications -
2010:25 Modelling Coupled Processes in the Evolution of Repository Engineered Barrier Systems using QPAC-EBS
Currently in Sweden, the SR-Site safety assessment for a spent nuclear fuel repository is being developed by the Swedish Nuclear Fuel and Waste Management Company (SKB). The planned SSM review of this work requires access to a sufficient modelling capability to assess the combined performance of the engineered barriers (spent fuel canister, buffer and backfill) and the natural geosphere...
Content type: Publications -
2010:43 Displacement along extensive deformation zones at the two SKB sites: Forsmark and Laxemar
The Fennoscandian shield is distinguished by that the exposed bedrock is mainly composed of Precambrian metamorphic and igneous rocks older than a billion or one and a half billion years with few easily distinguished testimonies for the younger history. Large parts of the present ground surface closely coincides with a late Precambrian denudation surface; the sub-Cambrian peneplain.
Content type: Publications