Filtered generated 373 hits.
-
1997:05 SKI SITE-94
The Swedish Industry program for deep geological disposal of spent nuclear fuel and high-level radioactive waste is now in the early stages of the site selection process, with feasibility studies underway in 5 to 10 municipalities. According to the Swedish Nuclear Fuel and Waste Management Co., SKB (SKB RD&D Programme, 1995), the ongoing siting process involves selection of two sites for...
Content type: Publications -
2022:14 Weld residual stress and strain measurements on a mock-up with single layer strip cladding common in reactor pressure vessels
Summary Residual stress and strain measurements were performed on a mock-up consisting of a 160 mm thick low-alloy ferritic steel plate of type SA-508 Class 3 with a single layer weld deposited strip cladding of austenitic stainless steel E308L. The cladding was manufactured with submerged arc strip welding adapted to a procedure used for reactor pressure vessels in the 1970s. Comprehensive...
Content type: Publications -
2022:18 Data report – sampling of sea water and marine organisms outside Ringhals NPP
SSM perspective Background The Radiation Safety Authority (SSM) funded the collection of marine biota over an annual cycle at the Ringhals nuclear power plant (NPP) to enable development of analytical methods for C-14. Methods for the C-14 analysis and results in the form of levels of C-14 in various marine organisms have been reported by the Swedish Defense Research Institute (FOI) in FOI...
Content type: Publications -
2010:21 Childhood leukaemia around nuclear facilities
The first indication of a possible relationship between living close to a nuclear installation and the risk of childhood leukaemia came from the United Kingdom in 1983. A cluster of childhood leukaemia in the town of Seascale which is located close to Sellafield was reported in a TV documen-tary. Since then almost 200 studies have been carried out in order to investi-gate the occurrence of...
Content type: Publications -
2009:15 Improvement and Validation of Weld Residual Stress Modelling Procedure
Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to arrive at proper conclusions when assessing detected flaws, for inspection planning and for assessment of leak-before-break margins. Therefore, it is very important to have...
Content type: Publications -
2009:05 Survey on requirements for independent reviews and inspections of electrical and I&C equipment
This survey is a first step to support the work to develop the Swedish regulations in the area of independent review and inspection in the process supporting implementation of electrical equipment in nuclear power plants. The report consists of a summary of different regulations in the area and also an analysis of the differences between the electrical and mechanical field especially in the...
Content type: Publications -
2008:50 Study on Developments in Accident Investigation Methods: A Survey of the “State-of-the-Art”
The objective of this project was to survey the main accident investigation methods that have been developed since the early or mid-1990s. The motivation was the increasing frequency of accidents that defy explanations in simple terms, for instance cause-effect chains or “human error”. Whereas the complexity of socio-technical systems is steadily growing across all industrial domains,...
Content type: Publications -
2007:04 Link Between RI-ISI and Inspection Qualification: Relationship between Defect Detection Rate and Margin of Detection
A relationship has been established between defect detection ratio and margin of detection based on blind trails. The results are based on a rather small amount of data produced by personnel from one inspection laboratory but give us indications of how signal to noise ratio is possible to relate to the probability of detection (POD) used in RI-ISI models. The relationship need to be developed...
Content type: Publications -
2014:35 Technical Note, Modelling comparison of alternative biosphere models with LDF models and evaluation of selected parameter values used in the biosphere dose assessment - Main review phase
This report has been prepared as part of the SSM’s Main Review Phase of SKB’s SR-Site performance assessment of the long-term safety of the KBS-3 geological disposal facility (GDF) proposed for construction at Forsmark. The review addresses the methodology employed in the dose assessment calculations of SR-Site; specifically issues of transport, accumulation and transfers of radionuclides in...
Content type: Publications -
2014:43 Technical Note, Workshop on general corrosion of copper
This report describes the outcome of the workshop organized by SSM on general corrosion of copper that was held in Stockholm on the 26-27th of August, 2013. The report summarizes the issues discussed and extracts the essential viewpoints that have been expressed. It should not be considered as a comprehensive record of all the discussions at the workshop and individual statements made by...
Content type: Publications