Filtered generated 403 hits.
-
2020:05 General data in accordance with the requirements in Article 37 of the Euratom Treaty
Decommissioning of the nuclear reactors Ringhals 1 and Ringhals 2 in Sweden...
Content type: Publications -
2008:05 International Expert Review of SR-Can: Safety Assessment Methodology - External review contribution in support of SSI's and SKI's review of SR-Can
In 2006, SKB published a safety assessment (SR-Can) as part of its work to support a licence application for the construction of a final repository for spent nuclear fuel. The report represented the culmination of work conducted by SKB over several years, focusing on the goal of making the licence application in late 2009. Results from the SR-Can project have been documented in several...
Content type: Publications -
2008:08 SSI:s independent consequence calculations in support of the regulatory review of the SR-Can safety assessment
With the publication of the SR-Can report at the end of 2006, Swedish Nuclear Fuel and Waste Management Co (SKB) have presented a complete assessment of long-term safety for a KBS-3 repository. The SR-Can project demonstrates progress in SKB’s capabilities in respect of the methodology for assessment of long-term safety in support of a licence application for a final repository. According to...
Content type: Publications -
2008:09 The Generalised Ecosystem Modelling Approach in radiological assessment
An independent modelling capability is required by SSI in order to evaluate dose assessments carried out in Sweden by, amongst others, SKB. The main focus is the evaluation of the long-term radiological safety of radioactive waste repositories for both spent fuel and low-level radioactive waste. To meet the requirement for an independent modelling tool for use in biosphere dose assessments,...
Content type: Publications -
2021:04 Calibration of models for cladding tube high-temperature creep and rupture in the FRAPTRAN-QT-1.5 program
SSM perspective Background In Swedish Light Water Reactors (LWR), stress corrosion cracking of reactor components and welds occurs from time to time. As the nuclear power plants are ageing, it is essential to study and further understand the mechanism for environmentally induced sensitization. Natural cracking is a phenomenon that is difficult to predict and very hard to study since it occurs...
Content type: Publications -
2021:10 Establishment and use of attention values in environmental fatigue assessments
SSM perspective Background As Swedish NPPs reach their original technical design life, re-assessment of the fatigue life of structural components is needed for safe long term operation (LTO). In these re-assessments one must consider that new knowledge has shown that environmental effects on fatigue life must be considered. One common method to verify the fatigue life of structural components...
Content type: Publications -
2021:20 Effects of additives on UO2 fuel behavior: expanded edition
SSM perspective Background The Swedish Radiation Safety Authority (SSM) follows the development of nuclear fuel closely. Fuel with additives like chromia and gadolinia is used in Swedish reactors and fuel with even better thermal and mechanical properties is under development. This project is an in-depth study of data and models regarding the impact of additives on the properties of uranium...
Content type: Publications -
2021:09 Mechanisms important for material modelling in weld residual stress analysis
SSM perspective Background The prediction of weld residual stresses (WRS) is very complex as many mechanisms and phenomena influence the development of WRS during welding. For accurate prediction, the constitutive material models used are essential and must be able to describe the material response of the weldment constituents. For example, selection of a material model should only depend on...
Content type: Publications -
2024:17 Atomistic studies on the adsorption and desorption of radionuclides on fuel crud and system surfaces in Light Water Reactors
SSM perspective Background Radiation safety is of particular concern during power plant maintenance. Radionuclides produced by the neutron bombardment in the core during operation may accumulate on system surfaces such as the filter system or piping and contribute to the radiation field. Some ions that are prone to neutron capture often become trapped in the deposits on the fuel cladding...
Content type: Publications -
2024:18 Modelling Environmental Sensitization of Chromia Forming Nickel Base Alloys Toward Stress Corrosion Cracking in Light Water Reactors by Atomistic Simulations
SSM perspective Background Stress corrosion cracking (SCC) in load bearing structures has been a longstanding issue both in pressurized and boiling water reactors. The specific environment in nuclear power applications consists of high temperatures and pressures that together with the effects of the radiation field on the coolant composition provide tough conditions for the materials used in...
Content type: Publications