Filtered generated 233 hits.
-
1997:05 SKI SITE-94
The Swedish Industry program for deep geological disposal of spent nuclear fuel and high-level radioactive waste is now in the early stages of the site selection process, with feasibility studies underway in 5 to 10 municipalities. According to the Swedish Nuclear Fuel and Waste Management Co., SKB (SKB RD&D Programme, 1995), the ongoing siting process involves selection of two sites for...
Content type: Publications -
1990:18 Some Estimates of the Total NuclideInventory in the Year 2100 from Swedish Nuclear Power Production
The total nuclide inventory in spent fuel from the swedish nuclear power programme has been estimated for three cases. All reactors were arrumed to operate until the year 2010 and then shut down simultaneously. All fuel used was assumed to be based on enriched natural uranium. The reactors were assumed to shut down after 25 years of commercial operation, but not later than in the year 2010.
Content type: Publications -
2013:24 Modelling of nuclear fuel cladding under loss-of-coolant accident conditions
We present a unified model for calculation of zirconium alloy fuel cladding rupture during a postulated loss-of-coolant accident in light water reactors. The model treats the Zr alloy solid-to-solid phase transformation kinetics, cladding creep deformation, oxidation and rupture as a function of temperature and time in an integrated fashion during the transient. The fuel cladding material...
Content type: Publications -
2014:20 An evaluation of high-temperature creep of zirconium alloys: data versus models
In this report Dr Massih presents correlations for creep in different phases of zirconium alloys and also presents a general solution to the difficulty of accurately describing the material properties in phase transition for several zirconium alloys. Based upon superplasticity relations, models are adapted to fit with experimental data for materials in transition regions. The creep models are...
Content type: Publications -
2015:46 Assessment of data and criteria for cladding burst in loss-of-coolant accidents
Ali R. Massih, Lars Olof Jernkvist SSM English...
Content type: Publications -
2011:16 Modelling of ultrasonic testing of cracks in cladding
During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.
Content type: Publications -
2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark
Flow modelling using alternative assumptions regarding conceptual and parametric uncertainty in the spatial and structural relationships among fractures indicates elevated flow rates and groundwater velocities to deposition holes compared to SKB’s flow modelling results. Simulated sampling of fractures in boreholes does not indicate any reason to exclude the proposed spatial and structural...
Content type: Publications -
2014:38 Technical Note, Detailed assessment of radionuclide Kd-values for the geosphere-main review phase
The Swedish Radiation Safety Authority (SSM) is reviewing an application submitted by the Swedish Nuclear Fuel and Waste Management Company (SKB) in 2011 to construct and operate a deep geologic repository for spent nuclear fuel at the Forsmark site in the municipality of Östhammar, Sweden. SKB has presented details of its long-term safety assessment, SR-Site, in a main report (SKB, 2011,...
Content type: Publications -
2014:57 Technical Note, Issues in the Corrosion of Copper in a Swedish High Level Nuclear Waste Repository: Phase III. Role of Sulphide Ion in Anodic and Cathodic Processes
The most important findings of this research project show that: In the case when the bentonite buffer between the copper canister and the granitic rock is not damaged, we can neglect the possibility of general corrosion damage being a threat to canister integrity over a 100,000 year storage period. However, if the bentonite buffer is damaged for any reason, and does not act as an engineered...
Content type: Publications -
2015:08 Technical Note, Rheological properties of the Bentonite Buffer
Rheological properties for bentonite at high densities The properties of bentonite at high densities are extremely important and it appears as it has been to a certain extent well researched and understood, although further investigations regarding swelling of the bentonite would be welcome. What, however, seems to be missing is a comprehensive constitutive model capturing all the different...
Content type: Publications