Filtered generated 124 hits.
-
2016:16 Technical Note, Possible influence from stray currents from high voltage DC power transmission on copper canisters
Main Review Phase Introduction As part of the Swedish Radiation Safety Authority’s (SSM) review of the Swedish Nuclear Fuel and Waste management company (SKB) license application for a final storage for spent nuclear fuel, SSM has asked for complementary information regarding the effect of stray currents from high voltage cables on copper corrosion (SSM 2012). SKB therefore has performed an...
Content type: Publications -
2014:54 Technical Note, Further Modelling Comparison of Simple Reference Biosphere Models with the LDF Modelling Approach – Main Review Phase
This Technical Note describes further use of simple reference biosphere models for SSM’s review of the Landscape Dose Factor (LDF) approach adopted by SKB in the SR‑Site safety assessment for the proposed final disposal of spent nuclear fuel at the Forsmark site. Simple biosphere models for the Forsmark site under temperate climate conditions were previously developed for SSM’s review and are...
Content type: Publications -
2014:58 Technical Note, Rock Mechanics - Assessing probability and extent of blind faults and fault-end growth around the KBS-3 repository at Forsmark – Main Review Phase
To get a general understanding of the stability conditions of the fault and deformation zone inventory at Forsmark a reactivation potential analysis was carried out. At present-day stress conditions the deformation zones are stable and show no large deformations or detected seismicity. Any changes in stress, and in particular increase of differential stress on deformation zones, might cause...
Content type: Publications -
2014:47 Technical Note, Assessment of groundwater salinity evolution at repository depth and especially the impact of dilute water infiltration
Groundwater compositions entering deposition holes in the repository will be progressively diluted over time because of expected changes of topographic and climatic conditions at Forsmark. This is a long-term safety issue because very dilute water could destabilise compacted bentonite and erode buffer, leading to advective movement of sulphide-containing water to the canister surface. SKB’s...
Content type: Publications -
2014:43 Technical Note, Workshop on general corrosion of copper
This report describes the outcome of the workshop organized by SSM on general corrosion of copper that was held in Stockholm on the 26-27th of August, 2013. The report summarizes the issues discussed and extracts the essential viewpoints that have been expressed. It should not be considered as a comprehensive record of all the discussions at the workshop and individual statements made by...
Content type: Publications -
2014:55 Technical Note, Further Reproduction of SKB’s Calculation Cases and Independent
Som en del av säkerhetsanalysen SR-Site presenterar SKB modellresultat som illustrerar kapseln och buffertens säkerhetsfunktioner. I var och en av de fem beräkningsfallen är delar av kapsel och/eller buffert frånvarande i modellen av slutförvarssystemet. Modellresultaten jämförs inte med säkerhetskriterier eftersom beräkningsfallen innehåller...
Content type: Publications -
2014:44 Technical Note, Independent evaluation of the number of critical canister positions in the KBS-3 repository at Forsmark – Main Review Phase
Independent calculations were carried out to estimate Ncrit, the number of canisters in critical positions that can be expected in the proposed repository at Forsmark, based on statistical simulations of SKB's geological discrete-fracture network (Geo-DFN) models, and taking into account SKB's full-perimeter criterion (FPC) and extended full-perimeter criterion (EFPC) to screen out...
Content type: Publications -
2015:05 Technical Note, Review of uncertainty propagation and sensitivity analysis in SR-Site Main Review Phase
The review assignment SSM2014-2060 “Review of uncertainty and sensi- tivity analysis in SR-Site” addressed three issues: 1. Adequacy of the methods adopted by SKB for conducting sensitivity analyses 2. Approach for use of conservative and best-estimate parameter values 3. Propagation of uncertainty for the corrosion scenario Adequacy of the methods for sensitivity analyses: The sensitivity...
Content type: Publications -
2014:59 Technical Note, Relation between earthquake magnitude, fracture length and fracture shear displacement in the KBS-3 repository at Forsmark – Main Review Phase
This study addresses one of several scenarios that could impair the physical integrity of the repository of spent nuclear fuel at the Forsmark site. Two sources of threat are: i) events due to thermal loading on the rock mass by the heat from canisters with spent nuclear fuel, and ii) seismic events, i.e. earthquakes, at the nearby deformation zones and zones intersecting the repository area.
Content type: Publications -
2014:46 Technical Note, QA in SKB’s Groundwater Flow Modelling
The general objective of the project is to provide review comments on SKB’s postclosure safety analysis, SR-Site, for the proposed repository at Forsmark. The specific objective is to get an understanding and an assessment of SKB’s quality assurance of the groundwater flow modelling in connection to SR-Site. The reliability of the results of the groundwater flow modelling depends inter alia...
Content type: Publications