Filtered generated 199 hits.
-
2007:37 Identification of Common Cause Initiating Events Using the NEA IRS Database
The study carried out within the framework of this project is a continuation of work conducted for SKI in 1998 on the identification of Common Cause Initiators based on operational events documented in the NEA Incident Reporting System (IRS). This project covered the events reported in the IRS database with the incident date in the period of 1980- 01-01 – 2006-11-15. The events of highest...
Content type: Publications -
2006:36 Mechanical Integrity of Canisters Using a Fracture Mechanics Approach
This report presents the methods and results of a research project for Swedish Nuclear Power Inspectorate (SKI) about numerical modeling of mechanical integrity of cast-iron canisters for the final disposal of spent nuclear fuel in Sweden, using combined boundary element (BEM) and finite element (FEM) methods The objectives of the project are: 1) to investigate the possibility of initiation...
Content type: Publications -
2005:60 Research and Service Experience with Environmentally-Assisted Cracking in Carbon and Low-Alloy Steels in High-Temperature Water
In this report, the most relevant aspects of research and service experience with environmentally assisted cracking of carbon and low-alloy steels in high-temperature water are reviewed, with special emphasis on the primary pressure-boundary components of boiling water reactors. The main factors controlling the susceptibility to environmentally assisted cracking under light water reactor...
Content type: Publications -
2005:61 Review and Assessment of SCC Experiments with RPV Steels in Oskarshamn 2 and 3 (ABB Report SBR 99-020)
Although the extent of cracking was rather surprising for a bolt-loaded specimen, the average stress corrosion crack growth rate of 0.5 mm/year over the five-year testing period does not represent an immediate concern. The overwhelming part of crack growth can have occurred during a 20 day chloride transient during the third year of exposure because of a condenser leakage after an outage. The...
Content type: Publications -
2002:04 Qualification of Electrical Components in Nuclear Power Plants. Management of Ageing
The work was finished and reported in Swedish in a limited publication 2000, Ingemansson Rapport H-14061-r-I. As the performed work was regarded to be of more general interest it is published again as a research report by the Swedish Nuclear Power Inspectorate. To be used in the international cooperation in nuclear safety it was also translated into English by the inspectorate, which is this...
Content type: Publications -
2001:23 Interactions of Severe Accident Researchand Regulatory Positions (ISARRP)
This project, started on April 1, 1999, had the specific objectives of determining whether; (i) the focus of the severe accidents (SA) research is consistent with that of the regulatory authorities, (ii) the results obtained so far by SA research satisfy the regulatory concerns, (iii) the future programs, envisaged will address the potential regulatory needs into next century, and (iv) how...
Content type: Publications -
1999:13 Determination of the Neutron and Photon Dose Equivalent at Work Places in Nuclear Facilities of Sweden
Various mixed neutron-photon fields at workplaccs in the containment of pressurised water reactors and in the vicinity of transport containers with spent fuel elements were investigated with spectrometers and dosimeters.The spectral neutron fluences evaluated from measurements with multisphere systems were recommended to be used for the calculation of dosimetric reference values for...
Content type: Publications -
1997:40 Aging of Electrical Components in Nuclear Power Plants
The purpose of the study reported in SKl Technical Report 93:39 was to evaluate qualification methods for application to components intended to be installed in the containment of nuclear power plants. The study included application of Arrhenius' criterion for thermal aging as well as methodologies for updating (curve-matching, ongoing qualification). This report reviews the results of...
Content type: Publications -
1997:12 Study of International Published Experiences in Joining Copper and Copper-alloys
This study has revealed a number of joining processes to be used when manufacturing copper-canisters for the final storage of high level nuclear waste. However, the decision on which material and which joining process to be used has to be based on the design criterions. The welding procedure has to be qualified i.e, it shall be demonstrated whether the procedure is capable of fulfilling...
Content type: Publications -
1996:70 Risks from Nuclear Waste
The first part of this review discusses the importance of risk. Man seems to have a longing for risks, like a part of the human nature. If risks are missing, they have to be invented, as needed parts in the emotional attraction of sports, amusement parks, traveling, etc.; this is the emotional part of risk. There is also a rational part of risk , in selecting such objects in ordinary life big...
Content type: Publications