Filtered generated 19 hits.
-
2024:02 Earthquake stationarity and distributed fault displacements, Forsmark repository site
SSM perspective Background and objective Large earthquakes occur predominantly along plate boundaries. Due to this, much of the research have been directed towards this tectonic setting. Also, the general lack of seismicity data in stable continental interiors, such as the Baltic Shield, have impeded estimations, as well as the understanding, of the seismic hazard in these tectonic settings.
Content type: Publications -
2023:14 Effect of gamma-irradiation on the redox states of the structural iron in bentonite clay
SSM perspective Background Bentonite clay is used as buffer and backfill material which form engineered barrier in the spent fuel repository. The buffer material surrounding the copper canister will be exposed to gamma and neutron radiations, especially during the first few hundred years after closure of the repository. The redox states of the structural iron in montmorillonite, the dominant...
Content type: Publications -
2023:11 Study of degradation of spent fuel’s structural material and core components under long-term wet storage
SSM perspective Background Sweden is managing the spent nuclear fuel and core components from its commercial nuclear reactors with a national strategic plan. The fuel and core components are initially stored at the reactor site. After an on-site storage period to comply with transportation limits on decay heat and radiation, these materials are shipped to the Clab (Central Interim Storage...
Content type: Publications -
2022:08 Geophysical surveys on sub marine land- and rock slides and on alpine glaciers
SSM perspective Background The future climate evolution and the impact it might have on a repository for radioactive waste is important when assessing the long-term safety. In a project funded by SSM (Holmlund et al. 2016), bathymetric data from the Southern Quark area between Sweden and Åland, provided by the Swedish Maritime Administration, were analysed, as well as terrestrial data from...
Content type: Publications -
2020:01 Sulphide-induced stress corrosion cracking and hydrogen absorption incopper exposed to sulphide and chloride containing deoxygenated water at 90°C
SSM perspective Background The concept that the Swedish nuclear power industry plans to utilise for the final disposal spent nuclear fuel is called KBS-3 method, which is based on three different barriers to prevent spreading of radioactive substances: copper canisters, bentonite buffers and the surrounding Swedish bedrock. In the current KBS-3 design, the spent nuclear fuel will be placed in...
Content type: Publications -
2018:21 Research on Resaturation of Bentonite Buffer
Background Resaturation processes in the bentonite buffer in a KBS-3 type repository for spent nuclear fuel are complicated and are often illustrated, analysed and modelled multi-disciplinarily as coupled thermal (T), hydrological (H) and mechanical (M) processes with multi-phase flow, elastoplastic evolution in a swelling porous medium. Previous THM-modelling showed that the re-saturation...
Content type: Publications -
2017:18 FEM analysis of the mechanical integrity for the canister intended for storage of spent nuclear fuel with regard to copper creep ductility
Background For final storage of spent nuclear fuel it is suggested by the Swedish nuclear fuel and waste management company (SKB) to emplace the nuclear fuel into copper canisters which are surrounded by bentonite clay at approximately 500 meters’ depth into granitic rock. After emplacement of the canisters Bentonite swelling due to water saturation and hydrostatic pressure build up the...
Content type: Publications -
2017:15 Radionuclide release rates associated with bounding cases featuring relatively early canister failures in a spent fuel repository
Background In 2011 the Swedish Nuclear Fuel and Waste Management Co (SKB) submitted a license application for construction of a geological repository for spent nuclear fuel according to the KBS-3 method, comprising of copper canisters, bentonite buffer, backfill and surrounding crystalline bedrock. The post-closure safety assessment of the repository, SR-Site, has been reviewed by the Swedish...
Content type: Publications -
2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C
Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile stresses are present as well as a material were SCC can occur, SCC could potentially be a problem for the...
Content type: Publications -
2016:30 Measurement of Parameter Values for Predicting Corrosion Phenomena on Copper in Swedish HLNW Repositories
Passivity breakdown and pitting on pure copper, the assumed material for the canisters for the isolation of high-level nuclear waste in Sweden, has been studied in simulated, sulphide- and chloride containing granitic rock groundwater and the data are interpreted in terms of the Point Defect Model (PDM). The results indicated that a sulphide barrier layer forms on the copper surface, and that...
Content type: Publications