Filtered generated 289 hits.
-
2020:01 Sulphide-induced stress corrosion cracking and hydrogen absorption incopper exposed to sulphide and chloride containing deoxygenated water at 90°C
SSM perspective Background The concept that the Swedish nuclear power industry plans to utilise for the final disposal spent nuclear fuel is called KBS-3 method, which is based on three different barriers to prevent spreading of radioactive substances: copper canisters, bentonite buffers and the surrounding Swedish bedrock. In the current KBS-3 design, the spent nuclear fuel will be placed in...
Content type: Publications -
2020:02 Models for axial gas flow and mixing in LWR fuel rods
SSM perspective Background Fission gases inside a fuel rod plays an important role in the behaviour of the fuel, both during normal operation and during events and accidents. Fission gases are released from inside the fuel pellets to the gap between the pellet and the cladding tube and then flow to the plenum volume at the top of the fuel rod. In high burnup fuel, this axial flow to the...
Content type: Publications -
2022:18 Data report – sampling of sea water and marine organisms outside Ringhals NPP
SSM perspective Background The Radiation Safety Authority (SSM) funded the collection of marine biota over an annual cycle at the Ringhals nuclear power plant (NPP) to enable development of analytical methods for C-14. Methods for the C-14 analysis and results in the form of levels of C-14 in various marine organisms have been reported by the Swedish Defense Research Institute (FOI) in FOI...
Content type: Publications -
2022:14 Weld residual stress and strain measurements on a mock-up with single layer strip cladding common in reactor pressure vessels
Summary Residual stress and strain measurements were performed on a mock-up consisting of a 160 mm thick low-alloy ferritic steel plate of type SA-508 Class 3 with a single layer weld deposited strip cladding of austenitic stainless steel E308L. The cladding was manufactured with submerged arc strip welding adapted to a procedure used for reactor pressure vessels in the 1970s. Comprehensive...
Content type: Publications -
2023:03 A novel method for retrospective analysis regarding appropriateness of radiological examinations
SSM perspective Background The use of X-ray diagnostic examinations, especially computed tomography, has increased in recent decades and it is essential that this increase is justified and contribute to a better care of the patients. There are many reasons to refrain from performing inappropriate radiological examinations, including not to expose patients to unnecessary ionising radiation. In...
Content type: Publications -
2024:01 Stress field modelling of the Forsmark lens – Correlation of stress measurements with stress field simulations
SSM perspective Background and objective Understanding the in-situ stress field in the Forsmark tectonic lens will lay the fundamental basis to characterise the prevailing mechanical and hydraulic behaviour of the rock mass. Only with a good understanding of the geomechanical setting including the stress field an analysis of future rock mass behaviour under the evolution of conditions in a...
Content type: Publications -
2025:04 Recent Research on electromagnetic fields and Health Risk, nineteenth report from SSM’s Scientific Council on Electromagnetic Fields, 2024
SSM perspective Background The Swedish Radiation Safety Authority’s (SSM) Scientific Council on Electromagnetic Fields monitors current research on potential health risks in relation to exposure to electromagnetic fields and provides the authority with advice on assessing possible health risks. The Council gives guidance when the authority must give an opinion on policy matters when...
Content type: Publications -
2017:13 Monte Carlo patient-specific pre-treatment QA system for volumetric modulated arc therapy
Background The clinical use of volumetric modulated arc therapy (VMAT) has augmented rapidly since it became commercially available. As a result, the need for comprehensive quality assurance (QA) has increased. Current practices in Sweden normally compare the delivered dose with the planned dose based on measurements with different methods, for instance: portal dosimetry, point dose...
Content type: Publications -
2015:37 Models for axial relocation of fragmented and pulverized fuel pellets in distending fuel rods and its effects on fuel rod heat load
Haverifall med kylmedelsförlust (LOCA) i lättvattenreaktorer kan leda till överhettning av bränslestavar, utvidgning av stavarnas kapslingsrör, samt axiell omflyttning av bränslekutsfragment i de delar av stavarna som expanderat. Bränsleomflyttningen kan koncentrera värmebelastningen till en begränsad del av stavarna och därigenom öka risken...
Content type: Publications -
2010:33 Lineament interpretation Short review and methodology
This report concerns a study which was initially conducted for the Swedish Nuclear Power Inspectorate (SKI), which is now merged into the Swedish Radiation Safety Authority (SSM). The conclusions and viewpoints presented in the report are those of the author and do not necessarily coincide with those of the SSM. In the characterization of a site that may have potential for hosting a...
Content type: Publications