Filtered generated 293 hits.
-
2014:28 Numerical simulation of ductile crack growth in residual stress fields
The study has shown on the capability of the cell model in capturing the effects on ductile tearing from limited pre-load levels and a residual stress field. Some of the conclusions are as follows: No distinctive influence on the material fracture toughness is observed from pre-loading (work hardening), both tensile and compressive, at room temperature of 1.5 or 3 % total strain. The cell...
Content type: Publications -
2014:18 Evaluation of the Halden IFA-650 loss-of-coolant accident experiments 2, 3 and 4
The analytical tools, which are fuel rod computer codes, that Quantum Technologies AB use and develop, contain models of several of the phenomena that are acting on the nuclear fuel (cladding temperature, fission gas driven pressure, strain and stress in the cladding, rod rupture, etc.) and how the separate effects interact in the complex integrated manner. The codes are under constant...
Content type: Publications -
2014:09 Further Development of the Core Simulator CORE SIM: Extension to coupled capabilities for BWRs
The developed tool is fully MatLab based and requires a set of input data from a commercial static core simulator. The driving perturbation can be specified both as a perturbation in thermo-hydraulic parameters or directly as a perturbation in macroscopic cross-sections. As output, the 3-dimensional spatial distribution of the noise in coolant density, pressure, enthalpy, inlet velocity, fuel...
Content type: Publications -
2013:27 Numerical simulations of headed anchors break in reinforced and non-reinforced concrete structures
The design codes for anchorage of equipment in concrete structures have been developed since the time the Swedish power plants were designed. Furthermore, the design basis has been updated and in some cases new mechanical loads have been added. As a consequence, it can be difficult for some anchorages to meet the requirements of today. In the design of anchorage equipment the beneficial effect...
Content type: Publications -
2013:09 An Application of the Functional Resonance Analysis Method (FRAM) to Risk Assessment of Organisational Change
The objective of this study was to demonstrate an alternative approach to risk assessment of organisational changes, based on the principles of resilience engineering. The approach in question was the Functional Resonance Analysis Method (FRAM). Whereas established approaches focus on risks coming from failure or malfunctioning of components, alone or in combination, resilience engineering...
Content type: Publications -
2012:70 Process Parameters Affecting Inhomogeneity of Material Microstructure
There’s been a tremendous change in the number, product types, locations, equipment, and manufacturing capabilities of stainless steel producers from the late 1960’s to present. This reconfiguration of the global steel industry occurred between the early 1970’s to the mid 1980’s and continues today. These changes have produced a loss in manufacturing flexibility, due to the inherent...
Content type: Publications -
2012:07 Implementation of the Master Curve method in ProSACC
Cleavage fracture toughness data display normally large amount of statistical scatter in the transition region. The cleavage toughness data in this region is specimen size-dependent, and should be treated statistically rather than deterministically. The Master Curve (MC) methodology is a procedure for mechanical testing and statistical analysis of fracture toughness of ferritic steels in the...
Content type: Publications -
2011:33 Mathematical modelling of ultrasonic testing of components with defects close to a non-planar surface
The report describes work that has been performed in order to model ultrasonic testing of components that contain a defect close to a non-planar surface. The studies have been performed in both 2D and 3D, and in 2D in both the anti-plane (SH) and the in-plane (P-SV). The results show that the presence of a non-planar back wall can reduce the detectability of defects close to the surface. The...
Content type: Publications -
2011:29 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 17
This report constitutes Stage 17 of a long-term research and development program concerning the development of diagnostics and monitoring methods for nuclear reactors. Results up to Stage 16 were reported in SKI and SSM reports, as listed below and in the Summary. The results have also been published in international journals and have been included in both licentiate- and doctor’s degrees.
Content type: Publications -
2011:19 Experimental evaluation of influence from residual stresses on crack initiation and ductile crack growth at high primary loads
Cracked components are usually subjected to loads causing both primary and secondary stresses, e.g. welding components. Engineering assessment approaches, such as the ASME XI code and the R6 procedure, are commonly used to conduct integrity assessment of such components. There has been an ongoing debate how to treat secondary stresses using engineering assessment methods. The nature of these...
Content type: Publications