Filtered generated 296 hits.
-
2012:70 Process Parameters Affecting Inhomogeneity of Material Microstructure
There’s been a tremendous change in the number, product types, locations, equipment, and manufacturing capabilities of stainless steel producers from the late 1960’s to present. This reconfiguration of the global steel industry occurred between the early 1970’s to the mid 1980’s and continues today. These changes have produced a loss in manufacturing flexibility, due to the inherent...
Content type: Publications -
2013:27 Numerical simulations of headed anchors break in reinforced and non-reinforced concrete structures
The design codes for anchorage of equipment in concrete structures have been developed since the time the Swedish power plants were designed. Furthermore, the design basis has been updated and in some cases new mechanical loads have been added. As a consequence, it can be difficult for some anchorages to meet the requirements of today. In the design of anchorage equipment the beneficial effect...
Content type: Publications -
2014:18 Evaluation of the Halden IFA-650 loss-of-coolant accident experiments 2, 3 and 4
The analytical tools, which are fuel rod computer codes, that Quantum Technologies AB use and develop, contain models of several of the phenomena that are acting on the nuclear fuel (cladding temperature, fission gas driven pressure, strain and stress in the cladding, rod rupture, etc.) and how the separate effects interact in the complex integrated manner. The codes are under constant...
Content type: Publications -
2014:09 Further Development of the Core Simulator CORE SIM: Extension to coupled capabilities for BWRs
The developed tool is fully MatLab based and requires a set of input data from a commercial static core simulator. The driving perturbation can be specified both as a perturbation in thermo-hydraulic parameters or directly as a perturbation in macroscopic cross-sections. As output, the 3-dimensional spatial distribution of the noise in coolant density, pressure, enthalpy, inlet velocity, fuel...
Content type: Publications -
2009:15 Improvement and Validation of Weld Residual Stress Modelling Procedure
Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to arrive at proper conclusions when assessing detected flaws, for inspection planning and for assessment of leak-before-break margins. Therefore, it is very important to have...
Content type: Publications -
2009:07 Dependency Analysis Guidance Nordic/German Working Group on Common Cause Failure analysis
The Regulatory Code SSMFS 2008:1 of Swedish Radiation Safety Authority (SSM) includes requirements regarding the performance of probabilistic safety assessments (PSA), as well as PSA activities in general. Therefore, the follow-up of these activities is part of the inspection tasks of SSM. According to the SSMFS 2008:1, the safety analyses shall be based on a systematic identification and...
Content type: Publications -
2009:27 Analysis Strategy for Fracture Assessment of Defects in Ductile Materials
SSM has supported research for investigating the role of secondary stresses when fracture assessments are performed for cracked structures made of ductile materials. There are evidences that indicate that some secondary stresses, such as weld residual stresses, are not as important as primary stresses for estimating the safety margin against rupture (measured by the J-integral) for the type...
Content type: Publications -
2007:15 Evaluation of the FRAPTRAN -1.3 Computer Cod
The FRAPTRAN-1.3 computer code has been evaluated regarding its applicability, modelling capability, user friendliness, source code structure and supporting experimental database. The code is intended for thermo-mechanical analyses of light water reactor nuclear fuel rods under reactor power and coolant transients, such as overpower transients, reactivity initiated accidents (RIA),...
Content type: Publications -
2007:14 Review of experimental data for modelling LWR fuel cladding behaviour under loss of coolant accident conditions
This project has contributed to the research goal of giving a basis for SKIs supervision by means of evaluating experimental data and modelling the nuclear fuel cladding during a design base accident. The project has also contributed to the research goal to develop the competence about licensing of fuel at high burnup, which is an important safety issue. The results are useful as such, but...
Content type: Publications -
2007:26 Safety Culture Enhancement Project Final Report
At the International Conference on Safety Culture in Nuclear Installations, organized by IAEA in 2002, one concluding remark was that the regulators should encourage a sincere interest in safety culture among licensees. In line with this SKI wanted to explore a proactive path to encourage the licensees in their safety culture work. SKI also had the ambition to gain more information on the MTO...
Content type: Publications