Filtered generated 291 hits.
-
2019:04 Dosimetry in environments surrounding a laser-plasma accelerator
SSM perspective Background Modern laser technology makes it possible to generate ultrashort pulses with a very high peak power. At the Lund Laser Centre, a high-power laser facility in Lund, Sweden, laser pulses having a duration of approximately 30 femtoseconds are generated with a maximum peak power of up to 40 terawatts. When these pulses are focused, extreme light intensity is achieved.
Content type: Publications -
2021:01 In situ NMR condition monitoring of cable insulations in Nuclear Power Plants
Prof. István Furó, Dr. Payam Pourmand, Dr. Pavel Yushmanov SSM English...
Content type: Publications -
2021:02 On Water Induced Sensitization of Ni (Fe,Cr) alloys towards Stress Corrosion Cracking in LWR Piping from 1st Principles Modelling
SSM perspective Background In Swedish Light Water Reactors (LWR), stress corrosion cracking of reactor components and welds occurs from time to time. As the nuclear power plants are ageing, it is essential to study and further understand the mechanism for environmentally induced sensitization. Natural cracking is a phenomenon that is difficult to predict and very hard to study since it occurs...
Content type: Publications -
2021:05 Cladding tube rupture under LOCA: Data and models for rupture opening size
SSM perspective Background The Swedish Radiation Safety Authority (SSM) follows the research on fuel performance closely. One aspect that is currently being studied in several research projects is the risk of release of fragmented fuel into the primary coolant in case of an accident. This risk depends on complex conditions were one is the possibility and size of a rupture of the fuel rod...
Content type: Publications -
2024:14 Residual stress distributions in nickel-based dissimilar metal pipe welds
SSM perspective This report concerns a study which has been conducted for the Swedish Radiation Safety Authority, SSM. The conclusions and viewpoints presented in the report are those of the author/authors and do not necessarily coincide with those of the SSM. Abstract It is common for nickel-base materials to be used as filler metals in the welding of dissimilar metal welds. Dissimilar metal...
Content type: Publications -
2017:16 Stress intensity factor solutions for circumferential cracks in cylindrical bars under axisymmetric loading and global bending
Background The case of a circumferential crack in a cylindrical bar has not been available in the ProSACC code. The need for such a geometry, especially considering nonlinear axisymmetric loading and global bending, has motivated the development of new stress intensity factor solutions, also known as K-solutions. These new K-solutions will be available in ISAAC, the successor to ProSACC.
Content type: Publications -
2017:29 Evaluation of the simulation software CIVA for qualification purpose
Background Modeling is an important tool within NDT, partly to develop and optimize testing technologies, but also within the Qualification Body’s activities to assess technical verifications and perform parameter studies. SSM has supported university research in the area for many years and, among other things, in the development of a software for ultrasound modeling. In addition, the...
Content type: Publications -
2025:03 APRI-11 – Final Report
SSM perspective Background The Swedish Radiation Safety Authority together with the Swedish Power companies operating nuclear power reactors in Sweden have since early 1990’s provided financial support for severe accident research at KTH and Chalmers. The research was initiated almost directly after the installation of severe accident management system and strategy, as filtered containment...
Content type: Publications -
International radiation safety course in Stockholm gives participants practical knowledge
With radiation protection experts from all over the world and a focus on practical exercises and case studies, International Radiological Protection School (IRPS) gives professionals from over 20 different countries the opportunity for increased understanding of international radiation protection issues.
Content type: News -
2013:27 Numerical simulations of headed anchors break in reinforced and non-reinforced concrete structures
The design codes for anchorage of equipment in concrete structures have been developed since the time the Swedish power plants were designed. Furthermore, the design basis has been updated and in some cases new mechanical loads have been added. As a consequence, it can be difficult for some anchorages to meet the requirements of today. In the design of anchorage equipment the beneficial effect...
Content type: Publications