Filtered generated 291 hits.
-
2017:34 Human capability to cope with unexpected events är publicerad
Background In the light of the Fukushima accident, it stood clear that the challenge of the unexpected is of great importance to both regulators and licensees. For SSM, as for many other national regulators, there was a selfevident need to learn more about the capabilities and actions of people when the unexpected arises and conditions are potentially extreme. A task group was set up within...
Content type: Publications -
2019:27 Effect of residual stress on ductile fracture at low primary loads – Numerical study
SSM perspective Background Present report is a continuation of earlier work reported in SSM2009:27 regarding an analysis strategy for fracture assessment of defects in ductile material and SSM2011:19 on the influence from residual stresses on crack initiation and ductile crack growth at high primary loads. The Swedish procedure for safety assessment of components with defects is documented in...
Content type: Publications -
2020:04 Recent Research on EMF and Health Risk, Fourteenth report from SSM’s Scientific Council on Electromagnetic Fields, 2019
SSM perspective Background The Swedish Radiation Safety Authority’s (SSM) Scientific Council on electromagnetic Fields monitors current research on potential health risks in relation to exposure to electromagnetic fields and provides the Authority with advice on assessing possible health risks. The Council gives guidance when the Authority must give an opinion on policy matters when...
Content type: Publications -
2020:08 Identifying radiologically important ESS-specific radionuclides and relevant detection methods
SSM perspective Background The European Spallation Source (ESS) facility is under construction in Lund, Sweden. High-energy protons will be accelerated in a linear accelerator and generate neutrons when hitting a rotating target of tungsten. This spallation process will also generate a wide range of different radioactive by-products of which a small part will be released to the environment...
-
2021:04 Calibration of models for cladding tube high-temperature creep and rupture in the FRAPTRAN-QT-1.5 program
SSM perspective Background In Swedish Light Water Reactors (LWR), stress corrosion cracking of reactor components and welds occurs from time to time. As the nuclear power plants are ageing, it is essential to study and further understand the mechanism for environmentally induced sensitization. Natural cracking is a phenomenon that is difficult to predict and very hard to study since it occurs...
Content type: Publications -
2021:20 Effects of additives on UO2 fuel behavior: expanded edition
SSM perspective Background The Swedish Radiation Safety Authority (SSM) follows the development of nuclear fuel closely. Fuel with additives like chromia and gadolinia is used in Swedish reactors and fuel with even better thermal and mechanical properties is under development. This project is an in-depth study of data and models regarding the impact of additives on the properties of uranium...
Content type: Publications -
2022:16 Recent Research o EMF and Health Risk, Sixteenth report from SSM’s Scientific Council on Electromagnetic Fields, 2021
SSM perspective Background The Swedish Radiation Safety Authority’s (SSM) Scientific Council on Electromagnetic Fields monitors current research on potential health risks in relation to exposure to electromagnetic fields and provides the authority with advice on assessing possible health risks. The Council gives guidance when the authority must give an opinion on policy matters when...
Content type: Publications -
2022:04 Warm Pre-Stressing mechanisms
SSM perspective Background Swedish nuclear power plants (NPP) were originally designed and analyzed with an assumed operating period of approximately 40 years. As Swedish NPPs reach their original technical design life the safety of the additional operating time has to be verified. With increased operating time, the shift in the fracture toughness curve of the reactor pressure vessel (RPV)...
Content type: Publications -
2022:09 Assessment of modelling approaches for axial gas flow inside LWR fuel rods
SSM perspective Background The fuel rod analysis program SCANAIR has been developed by IRSN (Institut de Radioprotection et de Sûreté Nucléaire) for analysis of reactivity initiated accidents (RIA) in light water reactors. The Swedish Radiation Safety Authority (SSM) has access to SCANAIR in exchange for annual contributions for its further development. The development and administration...
Content type: Publications -
2023:11 Study of degradation of spent fuel’s structural material and core components under long-term wet storage
SSM perspective Background Sweden is managing the spent nuclear fuel and core components from its commercial nuclear reactors with a national strategic plan. The fuel and core components are initially stored at the reactor site. After an on-site storage period to comply with transportation limits on decay heat and radiation, these materials are shipped to the Clab (Central Interim Storage...
Content type: Publications