Filtered generated 23 hits.
-
2011:09 Is Copper Immune to Corrosion When in Contact With Water and Aqueous Solutions?
The KBS-3concept implies that spent nuclear fuel is placed in copper canisters surrounded by clay and finally placed approximately 500 m down from surface into granitic bedrock, in order to isolate the spent nuclear fuel from humans and environment for very long time scales (i.e. millions of years). The concept is based on the multi-barrier principle, in this respect the barriers are the...
Content type: Publications -
2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen
One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...
Content type: Publications -
2011:08 Workshop on Copper Corrosion and Buffer Erosion Stockholm 15-17 September 2010
In SSM:s preparation for reviewing SKB:s license application for disposal of spent nuclear fuel, a series of technical workshops have been conducted. The main purpose of this type of workshops is to get an overall understanding of the state of knowledge on interdisciplinary issues as well as of questions in the research front by inviting several experts. Previous workshops have addressed the...
Content type: Publications -
2011:03 On Decommissioning Cost for Nuclear Power Plants
This research report summarizes what has changed over the latest 15 years concerning actual and estimated costs for the D&D of nuclear power plants that have been shut down permanently. It also reports on the availability of detailed information for actual nuclear power plant D&D cost breakdowns. The results will be one supporting document in the review of the estimates submitted for...
Content type: Publications -
2011:02 The Back-End of the Nuclear Fuel Cycle in Sweden, Considerations for safeguards and data handling
The report is a compilation report consisting of three papers. A safeguards approach for the planned encapsulation facility and the operating final repository is presented in paper 1. Special considerations concerning safeguards for the final disposal process have been discussed and incorporated into the approach. Paper 2 defines the spent fuel data that must be secured, for safeguards...
Content type: Publications -
2011:30 A fatigue analysis including environmental effects for a pipe system in a Swedish BWR
The effect of the environment on fatigue design has been the subject of intense study in USA, Japan and elsewhere. Several reports indicate a potentially large influence of the environment, leading to the proposal of entirely new analysis procedures. SSM has in an earlier project sponsored research to evaluate the technical basis for these proposals, see SSM Research Report 2011:04. In the...
Content type: Publications -
2011:20 A Guidebook for Evaluating Organizations in the Nuclear Industry – an example of safety culture evaluation
Organizations in the nuclear industry need to maintain an overview on their vulnerabilities and strengths with respect to safety. Systematic periodical self- assessments are necessary to achieve this overview. This guidebook provides suggestions and examples to assist power companies but also external evaluators and regulators in carrying out organizational evaluations. Organizational...
Content type: Publications -
2011:16 Modelling of ultrasonic testing of cracks in cladding
During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.
Content type: Publications -
2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark
Flow modelling using alternative assumptions regarding conceptual and parametric uncertainty in the spatial and structural relationships among fractures indicates elevated flow rates and groundwater velocities to deposition holes compared to SKB’s flow modelling results. Simulated sampling of fractures in boreholes does not indicate any reason to exclude the proposed spatial and structural...
Content type: Publications -
2011:06 Reliability Data Handbook for Piping Components in Nordic Nuclear Power Plants – R Book, Phase 2
The Nordic PSA Group (NPSAG) has undertaken to develop a piping reliability parameter handbook for use in risk-informed applications that involve the consideration of structural integrity of piping systems. The scope of the handbook is to establish high quality reliability parameters that account for the Nordic and worldwide service experience with safety-related and non-safety-related piping...
Content type: Publications