Filtered generated 173 hits.
-
2011:16 Modelling of ultrasonic testing of cracks in cladding
During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.
Content type: Publications -
2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark
Flow modelling using alternative assumptions regarding conceptual and parametric uncertainty in the spatial and structural relationships among fractures indicates elevated flow rates and groundwater velocities to deposition holes compared to SKB’s flow modelling results. Simulated sampling of fractures in boreholes does not indicate any reason to exclude the proposed spatial and structural...
Content type: Publications -
2013:24 Modelling of nuclear fuel cladding under loss-of-coolant accident conditions
We present a unified model for calculation of zirconium alloy fuel cladding rupture during a postulated loss-of-coolant accident in light water reactors. The model treats the Zr alloy solid-to-solid phase transformation kinetics, cladding creep deformation, oxidation and rupture as a function of temperature and time in an integrated fashion during the transient. The fuel cladding material...
Content type: Publications -
2014:20 An evaluation of high-temperature creep of zirconium alloys: data versus models
In this report Dr Massih presents correlations for creep in different phases of zirconium alloys and also presents a general solution to the difficulty of accurately describing the material properties in phase transition for several zirconium alloys. Based upon superplasticity relations, models are adapted to fit with experimental data for materials in transition regions. The creep models are...
Content type: Publications -
2015:46 Assessment of data and criteria for cladding burst in loss-of-coolant accidents
Ali R. Massih, Lars Olof Jernkvist SSM English...
Content type: Publications -
1997:05 SKI SITE-94
The Swedish Industry program for deep geological disposal of spent nuclear fuel and high-level radioactive waste is now in the early stages of the site selection process, with feasibility studies underway in 5 to 10 municipalities. According to the Swedish Nuclear Fuel and Waste Management Co., SKB (SKB RD&D Programme, 1995), the ongoing siting process involves selection of two sites for...
Content type: Publications -
1990:18 Some Estimates of the Total NuclideInventory in the Year 2100 from Swedish Nuclear Power Production
The total nuclide inventory in spent fuel from the swedish nuclear power programme has been estimated for three cases. All reactors were arrumed to operate until the year 2010 and then shut down simultaneously. All fuel used was assumed to be based on enriched natural uranium. The reactors were assumed to shut down after 25 years of commercial operation, but not later than in the year 2010.
Content type: Publications -
2009:33 Workshop on spent fuel performance, radionuclide chemistry and geosphere transport parameters, Lidingö 2008: Overview and evaluation of recent SKB procedures
The safety assessment for disposal of spent nuclear fuel canister in the Swedish bedrock should thoroughly address the time period after a containment failure. Such a failure could be expected as a result of corrosion damage or mechanical failure due to rock movement. This report mainly covers some issues connected to parameters used for radionuclide transport calculations in the areas of...
Content type: Publications -
2010:09 Copper Thermodynamics in the Repository Environment up to 130˚C
The mechanisms of copper corrosion for a KBS-3 repository for spent nuclear fuel need to be known with a high level of confidence. This is because the overall rate of copper canister corrosion (accounting for corroding species concentrations, geochemical conditions and the mass transport through surrounding barriers) provides an essential performance indicator in safety assessment. A...
Content type: Publications -
2009:19 Review of SKB’s Quality Assurance Programme
SKB is preparing a license application for the construction of a final repository for spent nuclear fuel in Sweden. This application will be supported by the safety assessment SR-Site for the post-closure phase. The assessment of long-term safety is based on a broad range of experimental results from laboratory scale, intermediate scale and up to full scale experiments. It is essential that...
Content type: Publications