Search

Filtered generated 233 hits.

Sort on:

Relevance Date
  • 2012:17 Technical Note, Corrosion of copper canister

    It is expected that the inflow of ground water to the deposition holes and tunnels in the Forsmark repository will be very slow. Thus, it might take some few hundred years up to thousand years before the deposition holes are filled with ground water and it might take 6000 years or more before the bentonite buffer is fully water saturated and pressurized. The copper canisters will therefore...

    Content type: Publications
  • 2011:09 Is Copper Immune to Corrosion When in Contact With Water and Aqueous Solutions?

    The KBS-3concept implies that spent nuclear fuel is placed in copper canisters surrounded by clay and finally placed approximately 500 m down from surface into granitic bedrock, in order to isolate the spent nuclear fuel from humans and environment for very long time scales (i.e. millions of years). The concept is based on the multi-barrier principle, in this respect the barriers are the...

    Content type: Publications
  • 2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen

    One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...

    Content type: Publications
  • 2011:10e Review and evaluation of the Swedish Nuclear Fuel and Waste Management Company’s RD&D Programme 2010. Statement to the Government and summary of the review report

    In accordance with Section 25 of the Ordinance (1984:14) on Nuclear Activities (Nuclear Activities Ordinance), the Swedish Radiation Safety Authority (SSM) shall review and assess the research, development and demonstration programme (RD&D programme) that the reactor licensees are obligated to establish in accordance with the Act (1984:3) on Nuclear Activities (Nuclear Activities Act).

    Content type: Publications
  • 2012:13 Technical Note, A review of the creep ductility of copper for nuclear waste canister application

    SKB has presented insufficient evidence to justify their position that the OFP copper has an adequate creep ductility during long term storage. Their large body of experiments only serves to prove that the creep ductility is sufficient for much shorter time spans than the intended storage times. There is a clear need for a credible theory of creep brittleness of OFP copper which will permit...

    Content type: Publications
  • 2011:31 Allocation of Decommissioning and Waste Liabilities

    A crucial task for the present generations is to ensure that environmental liabilities are identified sufficiently well so that it may be possible to accumulate the corresponding necessary financial assets in the Swedish Nuclear Waste Fund. Adequate funding will provide forthcoming generation’s with the financial means to decommission and dismantle older nuclear facilities that are part of...

    Content type: Publications
  • 2012:06 Decommissioning Cost Assessment

    The future costs for dismantling, decommissioning and handling of associated radioactive waste of nuclear installations represents substantial liabilities. It is the generations that benefits from the use of nuclear installations that shall carry the financial burden. Nuclear waste programmes have occasionally encountered set-backs related to the trust from society. This has resulted in...

    Content type: Publications
  • 2012:10 Technical Note, Review of the Geomicrobiological Aspects of SKB’s Licence Application for a Spent Nuclear Fuel Repository in Forsmark, Sweden

    The Swedish Radiation Safety Authority (SSM) reviews the Swedish Nuclear Fuel Company’s (SKB) applications under the Act on Nuclear Activities (SFS 1984:3) for the construction and operation of a repository for spent nuclear fuel and for an encapsulation facility. As part of the review, SSM commissions consultants to carry out work in order to obtain information on specific issues. The...

    Content type: Publications
  • 2011:21 Workshop on spent fuel performance and radionuclide chemistry -Rånäs 2010: Assessment of some outstanding issues

    The safety assessment for final disposal of spent nuclear fuel has to comprehensively address the stage when containment barriers have failed and when radionuclide releases occur to the surrounding groundwater at repository depth. Essential processes for estimating risk/dose related to this scenario involve the release of radionuclide from the spent fuel surfaces due to radio-lytic oxidative...

    Content type: Publications
  • 2010:25 Modelling Coupled Processes in the Evolution of Repository Engineered Barrier Systems using QPAC-EBS

    Currently in Sweden, the SR-Site safety assessment for a spent nuclear fuel repository is being developed by the Swedish Nuclear Fuel and Waste Management Company (SKB). The planned SSM review of this work requires access to a sufficient modelling capability to assess the combined performance of the engineered barriers (spent fuel canister, buffer and backfill) and the natural geosphere...

    Content type: Publications