Filtered generated 755 hits.
-
2011:04 Evaluation of the Technical Basis for New Proposals of Fatigue Design of Nuclear Components
During the recent years fatigue analysis procedures for nuclear components have been investigated. The most common method so far has been the American code ASME III. The basis for the current design procedures in ASME III is quite old and has now been evaluated against modern data leading to the proposal of modified design curves. Also the effect of the environment has been the subject of...
Content type: Publications -
2014:19 Evaluation of the Halden IFA-650 loss-of-coolant accident experiments 5, 6 and 7
The analytical tools, which are fuel rod computer codes, that Quantum Technologies AB use and develop, contain models of several of the phenomena that are acting on the nuclear fuel (cladding temperature, fission gas driven pressure, strain and stress in the cladding, rod rupture, etc.) and how the separate effects interact in the complex integrated manner. The codes are under constant...
Content type: Publications -
2011:30 A fatigue analysis including environmental effects for a pipe system in a Swedish BWR
The effect of the environment on fatigue design has been the subject of intense study in USA, Japan and elsewhere. Several reports indicate a potentially large influence of the environment, leading to the proposal of entirely new analysis procedures. SSM has in an earlier project sponsored research to evaluate the technical basis for these proposals, see SSM Research Report 2011:04. In the...
Content type: Publications -
2013:04 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stage 18
The program executed in Stage 18 consists of the following three parts: Application of CoreSim with a two-dimensional model of vibrating fuel assemblies, for the calculation of ex-core detector noise throughout a fuel cycle; An investigation of the neutron noise, induced by propagating perturbations, in various thermal and fast reactor systems, in two-group theory; A consistent derivation of...
Content type: Publications -
2014:56 Seismic design and analysis of safety-related nuclear structures in Sweden
The report presents the historical development of the seismic design for the U.S., France and Sweden with special focus on issues related to severe earthquakes beyond the design basis as well as important aspects concerning the design basis ground motions for the Swedish nuclear facilities. The report provides recommendations on a revised model for seismic hazard assessments, on minimum...
Content type: Publications -
2010:45 Evaluation of models for cyclic plastic deformation – A literature study
Analysis of nuclear components subjected to cyclic plastic deformation is normally based on the American standard ASME III. With the focus to improve the modeling of the stress-strain response under non-monotonic loading, several models for the analysis of cyclic plastic deformation have been developed in recent years. However, experience shows that the analysis and evaluation of plastic...
Content type: Publications -
2009:17 Effect of Welding Residual Stresses on Crack Opening Displacement and Crack-Tip Parameters
Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to arrive at proper conclusions when assessing detected flaws, for inspection planning and for assessment of leak-before-break margins. The fracture mechanical treatment of weld...
Content type: Publications -
2009:38 Research and Development Program in Reactor Diagnostics and Monitoring with Neutron Noise Methods, Stages 14 and 15
This report constitutes Stages 14 and 15 of a long-term research and development program concerning the development of diagnostics and monitoring methods for nuclear reactors. Stage 14 was a full one-year project, whereas Stage 15 consisted of a half-year project. Results up to Stage 13 were reported in SKI reports, as listed below and in the Summary. The results have also been published in...
Content type: Publications -
2018:01 Monte Carlo patient-specific pre-treatment QA system for volumetric modulated arc therapy
Background According to the Swedish Radiation Safety Authority's Regulations in Radiotherapy (SSMFS 2008:33) are Swedish clinics required to verify the individual dose to patients, prior the first time a new treatment is given. To fulfil this requirement, current clinics perform in-vivo dosimetry in three dimensional conformal radiation therapy (3DCRT), which means that the entrance of...
Content type: Publications -
2017:15 Radionuclide release rates associated with bounding cases featuring relatively early canister failures in a spent fuel repository
Background In 2011 the Swedish Nuclear Fuel and Waste Management Co (SKB) submitted a license application for construction of a geological repository for spent nuclear fuel according to the KBS-3 method, comprising of copper canisters, bentonite buffer, backfill and surrounding crystalline bedrock. The post-closure safety assessment of the repository, SR-Site, has been reviewed by the Swedish...
Content type: Publications