Filtered generated 32 hits.
-
2009:04 Radon in DWELLINGS in the Republic of Kalmykia. Results from the National Radon Survey 2006-2007
The National Radon Survey in the Republic of Kalmykia, Russian Federation during 2006 – 2007 was carried out in a cooperation project between the Swedish Radiation Protection Authority (SSI) and the Russian Institute of Radiation Hygiene (RIRH). This work was financed by the Russian Institute of Radiation Hygiene and the Swedish Agency for Development Cooperation (SIDA). In August 2006 SSI,...
Content type: Publications -
SSMFS 2008:32 The Swedish Radiation Safety Authority’s Regulations concerning the Competence of Operations Personnel at Reactor Facilities
SSM English...
Content type: Publications -
2009:15 Improvement and Validation of Weld Residual Stress Modelling Procedure
Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to arrive at proper conclusions when assessing detected flaws, for inspection planning and for assessment of leak-before-break margins. Therefore, it is very important to have...
Content type: Publications -
2009:24 UV-radiation induced disease – roles of UVA and UVB
There is a large uncertainty concerning the impact of UVA and UVB radiation on the skin and eye. For example, UVA radiation used to be considered low risk since it was believed that DNA damage could only be caused by UVB radiation. However, recent studies show that UVA and UVB can give rise to similar DNA damages in human skin. Because of the potentially greater exposure to UVA while using...
Content type: Publications -
2009:05 Survey on requirements for independent reviews and inspections of electrical and I&C equipment
This survey is a first step to support the work to develop the Swedish regulations in the area of independent review and inspection in the process supporting implementation of electrical equipment in nuclear power plants. The report consists of a summary of different regulations in the area and also an analysis of the differences between the electrical and mechanical field especially in the...
Content type: Publications -
2009:30 A Review of Evidence for Corrosion of Copper by water
The planned spent nuclear fuel repository in Sweden relies on a copper cast iron canister as the primary engineered barrier. The corrosion behaviour of copper in the expected environment needs to be thoroughly understood as a basis for the post-closure safety analysis. It has been shown that corrosion may indeed be the primary canister degradation process during the utilised assessment period...
Content type: Publications -
2009:32 On Younger Stakeholders and Decommissioning of Nuclear Facilities
An appropriate balance in this regard must be based on a proper understanding of the values and value functions of younger citizens. Such information must thus be an integral part of the knowledge base to be used when plans and processes are being developed for dismantling and decommissioning of nuclear power plants and other older nuclear facilities. In the present project, empirical data...
Content type: Publications -
2009:14 Review of Legislation and Regulatory Framework in Ukraine with Regard to Environmental Radiation Monitoring
This report was written in the frames of the development cooperation project in Ukraine entitled “Environmental Radiation Monitoring”. This report concerns a study which has been conducted for the Swedish Radiation Safety Authority, SSM. The conclusions and viewpoints presented in the report are those of the author/authors and do not necessarily coincide with those of the SSM. In 2006, the...
Content type: Publications -
2009:03 National Survey on Justification of CT-examinations in Sweden
All examinations in diagnostic radiology shall be justified to avoid unnecessary irradiation of the patients. The objective of the study was to investigate the degree of justification for CT-examinations in Sweden. Referrals for all examinations performed during one day were retrospectively evaluated by a group of physicians. The study was designed and conducted by a project group lead by...
Content type: Publications -
2009:35 Evaluation of SKB/Posiva’s report on the horizontal alternative of the KBS-3 method
The KBS-3 method, based on multiple barriers, is the proposed spent fuel disposal method both in Sweden and Finland. The method has two design alternatives: the vertical (KBS-3V) and the horizontal (KBS-3H). SKB and Posiva have conducted a joint research, development and demonstration (RD&D) programme in 2002-2007 with the overall aim of establishing whether the KBS-3H represents a...
Content type: Publications