Filtered generated 199 hits.
-
2018:25 UO2 fuel oxidation and fission gas release
Background The Swedish Radiation Safety Authority (SSM) follows the research on fuel performance closely. One aspect that has been the main question of several research projects is the fragmentation of fuel pellets during abnormal heat up. In this project the oxidation of UO2 is scrutinized and its effect on pellet fragmentation, fission gas release and damage of fuel rods has been...
Content type: Publications -
2018:18 Procedure for Safety Assessment of Components with Defects
Background SSM and the Swedish nuclear power plant owners have financed Kiwa Inspecta Technology in Sweden to develop a new version of the handbook for assessment of defects. This represents a major update of the former fracture mechanics handbook that was published at SSM as Research 2008:01. The procedure in the handbook is based on the British R6-method where the failure mechanisms...
Content type: Publications -
2018:17 Assessment of structures subject to concrete pathologies (ASCET), phase 2
Background ASCET is an international research project initiated by WGIAGE1 OECD2 / NEA3. WGIAGE4 Concrete subgroup is a working group within the OECD / NEA whose task is to address issues concerning the maintenance of the integrity of concrete structures, proposals for general principles to optimally handle the challenges of integrity, especially with regard to aging of concrete structures.
Content type: Publications -
2018:15 Review of Geochemical Data Utilisation in SR-Site Safety Assessment
The objective of this study is to understand how data for groundwater compositions were used in producing the Site Descriptive Model for Forsmark and as input data for the safety assessment, SRSite. Improving this understanding sheds further light on the significance of data uncertainties, data processing and interpretation on the degree of uniqueness in the descriptive model, parameterisation...
Content type: Publications -
2018:08 Calculated radiological consequences of applying European clearance levels to scrap metal from the decommissioning of Swedish nuclear facilities
Background Many practices involving radioactive substances generate materials with potential or known radioactive contamination. Clearance of materials means a decision that such materials can be released from regulatory control and used or disposed of without restrictions from a radiation protection point of view. According to regulations issued by the SSM, such decisions must be based on...
Content type: Publications -
2017:32 COMRAD – Comprehensive investigation of the performance of computed and digital radiography
Background Within the industry, there has long been a need to replace the traditional X-ray film and its handling. These both for economic and environmental considerations. Both computed radiography and digital radiography offer many advantages over the traditional use of x-ray with film. However, the transition from film-based radiography requires in-depth knowledge of the relationship...
Content type: Publications -
2017:29 Evaluation of the simulation software CIVA for qualification purpose
Background Modeling is an important tool within NDT, partly to develop and optimize testing technologies, but also within the Qualification Body’s activities to assess technical verifications and perform parameter studies. SSM has supported university research in the area for many years and, among other things, in the development of a software for ultrasound modeling. In addition, the...
Content type: Publications -
2017:27e Review of Swedish emergency planning zones and distances
ESS research facility Summary On 22 October 2015, the Government of Sweden commissioned the Swedish Radiation Safety Authority (SSM) to, in consultation with the Swedish Civil Contingencies Agency (MSB), relevant county administrative boards and the other authorities and stakeholders concerned, perform a review of emergency planning zones and emergency planning distances applying to...
Content type: Publications -
2017:25 Evaluation of weld fatigue reduction in austenitic stainless steel pipe components
Background The performed investigation is a continuation of the work performed in SSM 2015:38 where fatigue tests were performed on pressurized welded austenitic stainless steel piping components. The specimens were subjected to a realistic variable amplitude loading with mainly reversed bending deformation and particular focus on high cycle fatigue. The previous fatigue results were quite...
Content type: Publications -
2017:22 Effect of weld repairs on residual stresses in nickel base dissimilar metal welds
Background The driving force for crack growth near welds in nuclear application piping may arise from weld residual stresses. Experience from nondestructive examination show that cracks in dissimilar metal welds are often found near weld repairs. The repair welding may affect the residual stresses through e.g. increased tensile stresses and increased plastic straining on the surfaces of the...
Content type: Publications