Din avgränsning ger 300 träffar.
-
2009:17 Effect of Welding Residual Stresses on Crack Opening Displacement and Crack-Tip Parameters
Weld residual stresses have a large influence on the behavior of cracks growing under normal operation loads and on the leakage-flow from a through-wall crack. Accurate prediction of these events is important in order to arrive at proper conclusions when assessing detected flaws, for inspection planning and for assessment of leak-before-break margins. The fracture mechanical treatment of weld...
Innehållstyp: Publikationer -
SSM Report 2008:01 A combined deterministic and probabilistic procedure for safety assessment of components with cracks – Handbook
SSM has supported research work for the further development of a previously developed procedure/handbook (SKI Report 99:49) for assessment of detected cracks and tolerance for defect analysis. During the operative use of the handbook it was identified needs to update the deterministic part of the procedure and to introduce a new probabilistic flaw evaluation procedure. Another identified need...
Innehållstyp: Publikationer -
2009:25 APRI-6 Accident Phenomenaof Risk Importance
Kunskap om de fenomen som kan uppträda vid svåra haverier i en kärnkraftanläggning är viktig förutsättning för att kunna förutse anläggningens beteende, för att kunna utforma rutiner och instruktioner för haverihantering, för beredskapsplaneringen samt för att få god kvalitet på haverianalyser och riskstudier. De svenska...
Innehållstyp: Publikationer -
2008:33 Risk-informed assessment of defence in depth, LOCA example
The methods that are used today in PSA are applicable for evaluating defence-in-depth levels 1 and 2. Failure data can be determined through: human reliability analysis, riskinformed in-service-inspection methodology, system reliability analysis and directly from plant specific failure data for the components. Many DID activities against LOCA are not explicitly modelled in typical...
Innehållstyp: Publikationer -
2009:12 Evaluating safety-critical organizations – emphasis on the nuclear industry
The regulator identified a few years ago a need for a better understanding of and a deeper knowledge on methods for evaluating safety critical organisations. There is a need for solid assessment methods in the process of management of organisational changes as well as in continuously performed assessment of organisations such as nuclear power plants. A considerable body of literature exists...
Innehållstyp: Publikationer -
2007:23 On Safety Management, A Frame of Reference for Studies of Safety Management with Examples From Non-Nuclear Contexts of Relevance for Nuclear Safety
The authors present the theoretical framework. There they also discuss the pros of using the system perspective to build a useful frame of reference of safety management using non- nuclear organizations; this as a way to create models useful for the nuclear power industry but based on general understanding of the concept of safety management. The chosen organizations are used extensively to...
Innehållstyp: Publikationer -
2007:22 Safety Management An Introduction to a Frame of Reference Exemplified with Case Studies from Non-Nuclear Contexts
A systems perspective has been applied on safety management that will be the foundation for the frame of reference the authors intend to build during the three-year long project. The case studies are presented and form illustrations of both high quality safety management and weaknesses of the safety management and take a look at information feedback about the risks of the systems. An...
Innehållstyp: Publikationer -
2007:05 Development of an Input Model to MELCOR 1.8.5 for Oskarshamn 3 BWR
An input model has been prepared for the Oskarshamn 3 rector. Demonstrations calculations, at current nominal operating conditions in Oskarshamn 3 for 3300 MW thermal power, were performed for three cases: (1) initial, steady-state conditions, (2) total loss of AC power and (3) large steam line LOCA. The results are presented in the report. 200 Lars Nilsson SKI English An input model has been...
Innehållstyp: Publikationer -
2005:60 Research and Service Experience with Environmentally-Assisted Cracking in Carbon and Low-Alloy Steels in High-Temperature Water
In this report, the most relevant aspects of research and service experience with environmentally assisted cracking of carbon and low-alloy steels in high-temperature water are reviewed, with special emphasis on the primary pressure-boundary components of boiling water reactors. The main factors controlling the susceptibility to environmentally assisted cracking under light water reactor...
Innehållstyp: Publikationer -
1996:70 Risks from Nuclear Waste
The first part of this review discusses the importance of risk. Man seems to have a longing for risks, like a part of the human nature. If risks are missing, they have to be invented, as needed parts in the emotional attraction of sports, amusement parks, traveling, etc.; this is the emotional part of risk. There is also a rational part of risk, in selecting such objects in ordinary life big...
Innehållstyp: Publikationer