Din avgränsning ger 336 träffar.
-
2010:18 Radionuclide Transport: Preparation During 2009 for the SR-Site Review
Post-closure safety assessments for nuclear waste repositories involve radioecological modelling for an underground source term. Following several decades of research and development, the Swedish Nuclear Waste Management Company (SKB) is approaching a phase of license application. According to SKB’s plans, an application to construct a geological repository will be submitted by the end of...
Innehållstyp: Publikationer -
2010:31 Buffer erosion: An overview of concepts and potential safety consequences
In its safety analysis SR-Can, SKB reported preliminary results and conclusions on the mechanisms of bentonite colloid formation and stability, with a rough estimate of the consequences of loss of bentonite buffer by erosion. With the review of SR-Can the authorities (SKI and SSI) commented that erosion of the buffer had the greatest safety significance, that the understanding of the...
Innehållstyp: Publikationer -
2011:20 A Guidebook for Evaluating Organizations in the Nuclear Industry – an example of safety culture evaluation
Organizations in the nuclear industry need to maintain an overview on their vulnerabilities and strengths with respect to safety. Systematic periodical self- assessments are necessary to achieve this overview. This guidebook provides suggestions and examples to assist power companies but also external evaluators and regulators in carrying out organizational evaluations. Organizational...
Innehållstyp: Publikationer -
2011:24 Utredning och kartläggning av tillfällen då människan räddat och förbättrat en situation där automatiken inte räckt till eller fungerat fel
ÅF har genomfört en litteraturstudie och beskrivit en aktuell bild över rådande automations-filosofier och på vilket sätt människan påverkas av olika nivåer av automation. De har även kartlagt och beskrivit tre händelser inom kärnkraftsindustrin där människan ingripit och räddat eller förbättrat en situation där...
Innehållstyp: Publikationer -
2011:16 Modelling of ultrasonic testing of cracks in cladding
During the last two decades, SSM has supported research to develop a model for the non-destructive test situation based on ultrasonic technique. Such a model is important in many ways, for example to supplement and plan experimental studies and to perform parametric studies in qualification situation. Modeling can be a useful tool when the inspection system shall be technically justified.
Innehållstyp: Publikationer -
2011:13 Investigation of Discrete-Fracture Network Conceptual Model Uncertainty at Forsmark
Flow modelling using alternative assumptions regarding conceptual and parametric uncertainty in the spatial and structural relationships among fractures indicates elevated flow rates and groundwater velocities to deposition holes compared to SKB’s flow modelling results. Simulated sampling of fractures in boreholes does not indicate any reason to exclude the proposed spatial and structural...
Innehållstyp: Publikationer -
2016:32 Forskning inom teknisk kärnämneskontroll vid Uppsala universitet under 2014–2015
Gruppen vid Uppsala universitet för Fissionsdiagnostik och kärnämneskontroll har forskat kring olika metoder för att verifiera använt kärnbränsle, men även deltagit i utvecklingen av koncept för kärnämneskontroll för smältsalt reaktorer. Rapporten beskriver fyra forskningsområden närmare och sammanfattar verksamheten som...
Innehållstyp: Publikationer -
2011:34 Evolution of hydrogen by copper in ultrapure water without dissolved oxygen
One result from this research was that the experimental difficulties of repeating Hultqvist and co-workers work are considerable and were initially underestimated. The main challenge was to obtain satisfactory tightness of all connectors involved in the experimental set-up. The problems with leakage resulted in that the research program originally planned for in this project had to be reduced...
Innehållstyp: Publikationer -
2007:09 DECOVALEX-THMC - Task C
This report describes the results of Task C1 of the international DECOVALEX– THMC project devoted to Excavation Damage Zone (EDZ) in argillaceous rock at the Tournemire site in France. Task C of the project is aimed to understand the physical phenomena induced by excavation in the argillaceous rock. The task is to develop adequate numerical models for interpretation of observed damaged zones...
Innehållstyp: Publikationer -
2007:07 DECOVALEX-THMC Project - Task A
This report presents the definition of the first phase, Task A-1, of the Task A of the international DECOVALEX project. The task is a working example of how interaction between THMC modelling and SA analysis could be performed. Starting with the technical definition of the Task A, the report presents the results of preliminary THM calculations with a purpose of an initial appreciation of the...
Innehållstyp: Publikationer