Sök

Din avgränsning ger 83 träffar.

Sortera på:

Relevans Datum
  • 2012:11 Issues in the corrosion of copper in a Swedish high level nuclear waste repository

    The objective with this research project was to increase knowledge in the area of copper corrosion in the planned repository environment and obtain information on how copper corrosion evolves during the assessment period of 100 000 years. The equilibrium chemical composition of groundwater close to the canister as a function of temperature has been calculated by use of a thermodynamics code...

    Innehållstyp: Publikationer
  • 2011:12 Analysis of Barrier Performance: Modelling of Copper corrosion scenarios with and without buffer erosion

    The purpose of this project was to develop a numerical modelling capacity to address the corrosion of the copper canister under gradually changing transport conditions caused by buffer erosion and removal of buffer mass. Due to the complexity of this task, such a model cannot be realistic in all respects, but the present effort should address the feasibility of solving numerical and...

    Innehållstyp: Publikationer
  • 2009:22 Alternative modelling of brittle structures in a sub-area of the SKB candidate area at Forsmark, eastern Sweden

    A reasonable understanding of the character of the bedrock hosting a deep geological repository, i.e. the natural barrier, is an important component in the safety assessment of the deep geological repository for spent nuclear fuel. The structures in the rock, together with the regional stress field, affect the mechanical stability of the bedrock and the ground water transport within the...

    Innehållstyp: Publikationer
  • 2009:21 The geological history of the Baltic Sea a review of the literature and investigation tools

    The bedrock in Sweden mainly comprises Proterozoic magmatic and metamorphic rocks older than a billion or one and a half billion years with few easily distinguished testimonies for the younger history. For construction of a geological repository for deposition of nuclear waste it is important to understand the late, brittle, geological events to be able to estimate its influence and...

    Innehållstyp: Publikationer
  • 2017:18 FEM analysis of the mechanical integrity for the canister intended for storage of spent nuclear fuel with regard to copper creep ductility

    Background For final storage of spent nuclear fuel it is suggested by the Swedish nuclear fuel and waste management company (SKB) to emplace the nuclear fuel into copper canisters which are surrounded by bentonite clay at approximately 500 meters’ depth into granitic rock. After emplacement of the canisters Bentonite swelling due to water saturation and hydrostatic pressure build up the...

    Innehållstyp: Publikationer
  • 2017:02 Slow strain rate testing of copper in sulfide rich chloride containing deoxygenated water at 90 °C

    Background Stress corrosion cracking (SCC) can occur in materials from the combined influence of tensile stress and a corrosive environment. It has previously been shown in the literature, that copper can be sensitive to SCC in the presence of sulfide containing water. Since both tensile...

    Innehållstyp: Publikationer
  • 2013:27 Numerical simulations of headed anchors break in reinforced and non-reinforced concrete structures

    The design codes for anchorage of equipment in concrete structures have been developed since the time the Swedish power plants were designed. Furthermore, the design basis has been updated and in some cases new mechanical loads have been added. As a consequence, it can be difficult for some anchorages to meet the requirements of today. In the design of anchorage equipment the beneficial effect...

    Innehållstyp: Publikationer
  • 2009:30 A Review of Evidence for Corrosion of Copper by water

    The planned spent nuclear fuel repository in Sweden relies on a copper cast iron canister as the primary engineered barrier. The corrosion behaviour of copper in the expected environment needs to be thoroughly understood as a basis for the post-closure safety analysis. It has been shown that corrosion may indeed be the primary canister degradation process during the utilised assessment period...

    Innehållstyp: Publikationer
  • 2010:08 Development of COLLAGE 3

    The issue of colloid-facilitated radionuclide transport (CFRT) was last addressed by the Swedish nuclear regulators (SKI at that time, now integrated into SSM) in 2001 – 2002. SKI had commissioned the Collage code with subsequent development as Collage 2. This code was employed to investigate the potential role for colloids to have been involved in the transport of radionuclides at the Nevada...

    Innehållstyp: Publikationer
  • 2010:17 Quality Assurance Review of SKB’s Copper Corrosion Experiments

    SKB is preparing a license application for the construction of a final repository for spent nuclear fuel in Sweden. This application will be supported by the safety assessment SR-Site for the post-closure phase. The assessment of long-term safety is based on a broad range of experimental results from laboratory scale, intermediate scale and up to full scale experiments. It is essential that...

    Innehållstyp: Publikationer